I'm looking at cams and found a set of Bullfrog one's that
don't seem to bad. Anyone else have them? How are they, etc.?
Thanks

they are regrinds and not the best at all
stick with new crane or crower cams

Yeah regrinds are okay, but you can only do so much, and you have to shim yoru lifters. Much better to save the extra cash and get the billet cams from Crower or Crane.



Exile Racing Technologies: http://www.exileracing.com
una salus victus
It's holding down the garage floor right now.

if you're gonna get cams, it has to be all or nothing. get crower stage 2's or better or the crane #0016's or better. usually a "streetable" camshaft will leave you with wishing that you got a more aggressive cam.

Originally posted by ner947
if you're gonna get cams, it has to be all or nothing. get crower stage 2's or better or the crane #0016's or better. usually a "streetable" camshaft will leave you with wishing that you got a more aggressive cam.

I really want your cam gears but i am broke. :(

too bad he sold them

Damn it !:wallbash He did? but they were 2.4 Cam gears; who bought them? :scratch Only a few peeps I can think of...:shrug

Originally posted by D32ATalon
All motor or bust

Is that so? Welcome to the fold! If you decide to persue the all motor route with a 2GNT, you'll be joining a small group of people who like to be constantly broke and generally viewed as insane by everyone else. It takes a lot of work to get these cars even close to the 200hp mark. If you want to push the envelope all motor, you're going to need to be more concerned with your performance goals than with the price. It's teh expensive imo.

Peace of mind though...

You've found the right website to do it. :thumbsup