| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Code 36 |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=70185 |
70185, Code 36
Posted by taloniized, Mar-08-04 02:13 PM
Got this CEL today after installing my new ECU(remanufactured). How do I fix it?
|
70206, RE: Code 36
Posted by Uberingram, Mar-08-04 05:39 PM
36, PO107, 14, MAP sensor voltage too low, Harness and connector / Replace MAP sensor
Are you using a missing link or Star magic box? Might want to check the connections to be sure.
|
70208, RE: Code 36
Posted by run4cvr, Mar-08-04 06:57 PM
Pulsed secondary air injection solenoid circuit.
Get the recall re-done at Satan?
|
70211, RE: Code 36
Posted by Uberingram, Mar-08-04 08:02 PM
Originally posted by run4cvr
Pulsed secondary air injection solenoid circuit.
Where the hell did you get that code from? :wary I must be missing something.
EDIT: BIG FUCKING DOH! :wallbash I was looking in the wrong column on the CEL matrix on the main page. John is right and therefor the man. :bowdown
|
70212, RE: Code 36
Posted by OldGuy, Mar-08-04 11:08 PM
Yes that is exactly what it is. Check to make sure that hter is a recall on it and if not let me know and I can send you what the service manual has on that problem. You could start by checking the harness and connectors for solid connections and the condition of the wires. Corroded terminals etc...if you have a multimeter you could check resistance of the wires and continuity to rule that out. Let me know if I can be any help!
:thumbsup
|
70230, RE: Code 36
Posted by taloniized, Mar-09-04 06:17 AM
Pay attention Chris. Wrong code buddy. I'll take it in to satan if I can't do it myself.
|
70343, RE: Code 36
Posted by run4cvr, Mar-10-04 06:18 AM
Update?
|
70350, RE: Code 36
Posted by DR1665, Mar-10-04 09:14 AM
recall?
|
70351, RE: Code 36
Posted by bullox, Mar-10-04 09:19 AM
Originally posted by DR1665
recall?
95s only for that one IIRC
|
70356, RE: Code 36
Posted by DR1665, Mar-10-04 10:27 AM
Thanks. :thumbsup
|
70364, RE: Code 36
Posted by taloniized, Mar-10-04 12:05 PM
I took it in and they flashed the ECU. They said whenever you change your ECU, you should always take it in to flash it. That's what the parts guy told me before I got it. I just didn't want satan to mess with my car, but i had no choice.
|