I can't find just a wheel bearing bill hahn said i would be able to just find a bearing and not the whole assembly i have yet to do so and he hasn't replyed to my e-mail. THe i can't use the stock hubs because the spline is to small anyone have any ideas. Thanks

That is great Hahn service. you can get just the bearings if you disassemble the assy and take out the bearing balls and go to a bearing distributor for replacements. you will not find the bearing sold as a part to replace yours.

i thought the stage 2 axles were desined to fit our cars.....you are saying they wont fit...where the hell are we supposed to get oversized hubs?

if your bearings are wore down so that they are not the right size i can measure the ones i have and let you know what size ball bearings you need.

terry

I went to a bearing company and they said they have nothing. I am going to stop at detriot ball bearing monday and see if thay have anything. The axles i got from him have alot bigger spline on the axle and the hub is a steel hub and not cast. Pretty beffy. I don't really want to spend 179 on the hub assemblys to just dismantly them plus i was told they could get tweeked or broken pressing them on and then back in. Thanks

i dont have any idea what you are talking about.. i bought stage 2 axles and just plugged them righ in without any problems.

thanks James....are you still considering selling everything?

Terry

If you bought Bill Hahn's old axles, YOU HAVE STAGE *5* AXLES.

Bill illustrated all the requirements for those axles when he posted them for sale. This leads me to believe you did not have any idea what you were getting when you bought them. This makes me hate you, because i knew what they were and i wanted them.

Just sell them to me, and i'll send you some stage 2's in a few weeks, okay?

Originally posted by DarkOne
This makes me hate you, because...

bwahahahahahaha. i swear, 2gnt has the greatest admin of any site on the entire internet.

correction he said stage 2 with different hubs. I don't think there stage 5's. I am going to check at detriot ball bearing tomarrow. Could be stages 5's tho i dunno i don't think there going to brake there pretty beefy. I will try tho. }(

The only ones i know of that he had listed for sale were a used set of Stage 5's off the RS that required some hub work. You bought them for $500 correct?

yeah i paid 500 I seen him post in the utrbo section a while ago saying they were for sale and i e-mailed and then sent the money the next day. Hubs have 3ich studs also. He said that i could get bearings seperate. Then when i e-mailed after i couldn't find bearings he told me to go throw driveshaftshop adn get them but they don't sell bearings. So i dunno just gotta keep searching the bearings are the only thing holding me back from getthing the car going again.

Dunno what to tell you. When you find them, ost what you got and where you got it.

What do you have that necessitates stage 5 axles, if i may ask?

is ther any damage to the hubs? when you swap them take your bearing out and put them in the new hubs. easy to do. I have a spare set of hubs i disassembled and repacked with wheel bearing grease.


Terry

I will try to exchange them well'll see what happens. My motor is completely built and turboed will be running 26x8.5 slicks and spraying with 75-125. That is why i bought them.

dino wants your nuts :beer

lol



_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

I dunno about that but i will buy him beer at the shootout.

Originally posted by 95 silver gs
I dunno about that but i will buy him beer at the shootout.

he's gunna climb under your car and jack those axles, lol then you aint goin no where :)



_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

As long as i get one good pass then i will buy him beer and he can steal my axles.

contact www.driveshaftshop.com

they have full hub replacements for those axles. bill got them for free from driveshaft shop

Originally posted by 95 silver gs
As long as i get one good pass then i will buy him beer and he can steal my axles.

Seriously?

Yeah, those axles would be mighty nice }(

I am going to give driveshaft shop a call tehre e-mail said they don't carry bearings or anytihng for them. I dunno I am going to call now tho.

Just got off the phone he said get the stock hub assembly and press out the bearings and press in the new hubs how fucked up is that. I love having to rig shit up. O well back to the machine shop.

NO screw the machine shop. All you have to do is put the bearing in the vise. where the bearings are/mount flange, grip that lightly in a vise so you can hammer in it without it pushing through the vise. You want to get a junk socket that is 1/4"-1/2" bigger than the splines. Place the socket over the splines and hit it whith a hammer a few times. you will see the bearing separate without any effort really. you really dont have to hit the assy hard, so dont go wailing on it. what really holds the bearing assy together is the large nut on the axle.

Good luck

Terry

Originally posted by DarkOne

Originally posted by 95 silver gs As long as i get one good pass then i will buy him beer and he can steal my axles.

Seriously?

Hello Dino; are you still buying Armond's stage 2 axles ; because I was about to try to buy them from him because i need some asap, but he said you had dibs, thanks.

Suieclipse , no possibility on parting out your axles at all from that setup sale you got?

Originally posted by Initial DSM

Originally posted by DarkOne

Originally posted by 95 silver gs As long as i get one good pass then i will buy him beer and he can steal my axles.

Seriously?

Hello Dino; are you still buying Armond's stage 2 axles ; because I was about to try to buy them from him because i need some asap, but he said you had dibs, thanks. Suieclipse , no possibility on parting out your axles at all from that setup sale you got?

Paid for them today. Sorry dude.

Originally posted by DarkOne

Originally posted by Initial DSM

Originally posted by DarkOne

Originally posted by 95 silver gs As long as i get one good pass then i will buy him beer and he can steal my axles.

Seriously?

Hello Dino; are you still buying Armond's stage 2 axles ; because I was about to try to buy them from him because i need some asap, but he said you had dibs, thanks. Suieclipse , no possibility on parting out your axles at all from that setup sale you got?

Paid for them today. Sorry dude.

no problem, i figured so; just thought it wouldnt hurt to ask.