| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Speedo not working |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=69017 |
69017, Speedo not working Posted by importxs, Feb-22-04 03:41 AM
Well my speedometer is not working now, checked fuses, checked gauge cluster connection, but I found a weird sensor just sitting loosely in my engine bay. What is this:


|
69025, RE: Speedo not working Posted by Blizare, Feb-22-04 06:07 AM
hehe....yea I have that too.... Someone smarter must know what it is!
|
69031, RE: Speedo not working Posted by DarkOne, Feb-22-04 08:50 AM
You have a 95, correct?
That harness is, in all actuality, nothing. 95's had an emissions device that was specified in a TSB to be removed if it caused a problem. That is the harness that controlled it.
BTW, that's your reverse light switch in the picture. The speed sensor is in the back.
|
69058, RE: Speedo not working Posted by vaughn, Feb-22-04 07:20 PM
sounds like you speed sensor it right under your batt. tray. Mine did the same thing i just cleaned it be i replace it and it worked fine.
|
69073, RE: Speedo not working Posted by DarkOne, Feb-23-04 04:50 AM
Originally posted by vaughn sounds like you speed sensor it right under your batt. tray. Mine did the same thing i just cleaned it be i replace it and it worked fine.
No it isn't. The vehicle speed sensor is on the back of the trans on the diff housing. The reverse light switch is under the battery tray.
|
69097, RE: Speedo not working Posted by rhui, Feb-23-04 11:28 AM
My speedo doesnt work for a whole diff reason... I removed the ecu...
any ideas of how to get speedo working? :P
|
69098, RE: Speedo not working Posted by DarkOne, Feb-23-04 11:40 AM
Originally posted by rhui My speedo doesnt work for a whole diff reason... I removed the ecu... any ideas of how to get speedo working? :P
Start a new thread with some actual detail in it instead of an assinine comment ;-)
Then i can at least try to help you.
|