Go back to previous topic
Forum namePerformance/Engine
Topic subjectVery close....O2 Sensors...
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=68852
68852, Very close....O2 Sensors...
Posted by gilee_8, Feb-19-04 05:39 PM
Got water pump, got exhaust, got Head gasket, got timing belts components.... I am so close to get my car running again.
But I want it to RUN RIGHT.... THE PERFECT WAY.

So guys. I need go get new O2 sensors.. and the one I can get from Mitsubishi is $160+... too much.

Can I get others? I know the Bosch is very bad...but how bout other OEM replacement?
Like NOPI, will that last? and good?

Thanks... please give me as much inputs as possible, I wnat to run my car again asap!


THanks alot!
Gil
68853, RE: Very close....O2 Sensors...
Posted by DSMRoadster, Feb-19-04 06:00 PM
I got a bosch one and it works fine. I think others had pretty good sucess with the Denso ones also.
68854, RE: Very close....O2 Sensors...
Posted by gilee_8, Feb-19-04 06:05 PM
The bosch, everyone say it doens't last longer then 3 months...
And everyone say OEM is better. But is the o2 sensor avaible on the NOPI.com any good?

They are NTK... is that good?
68855, RE: Very close....O2 Sensors...
Posted by TXrepresent, Feb-19-04 06:26 PM
I've had the BOSCH one for over a year now and it still works fine!
68856, RE: Very close....O2 Sensors...
Posted by GhEttOrAiD, Feb-19-04 06:48 PM
can you just buy these from Dodge?
<edit> and can't you just not install the secondary o2 sensor as its basically pointless? (In conjunction with resistor mod)
68862, RE: Very close....O2 Sensors...
Posted by Dave41079, Feb-19-04 07:24 PM
I've had one from Nopi in for about 8 months now with no problems. According to my blinky light gauge, it works. I have blinkage. I have a square female plug on my harness, and the sensor had a male square plug, so that was good. Gorkoracing has a round male plug on his harness, and the sensor has a male square plug...not good. My car is a very early '96.
68863, RE: Very close....O2 Sensors...
Posted by Dave41079, Feb-19-04 07:25 PM
I've had one from Nopi in for about 8 months now with no problems. According to my blinky light gauge, it works. I have blinkage. I have a square female plug on my harness, and the sensor had a male square plug, so that was good. Gorkoracing has a round male plug on his harness, and the sensor has a male square plug...not good. My car is a very early '96.

EDIT: Sorry for the double post, I thought everything froze up and hit the button again. Is there any way to delete posts?
68869, RE: Very close....O2 Sensors...
Posted by gilee_8, Feb-20-04 01:45 AM
Thanks guys..
so the NOPI one is the same as the OEM Mitsubishi one.
Gil
68910, RE: Very close....O2 Sensors...
Posted by mcgyvr, Feb-20-04 11:38 AM
just call bob kise at forum (fenton) dodge
tell him your from asog or 2gnt or neons.org
15% over dealer cost

get the OEM one, the bosch design is a piece o crap, the metal shield around the element gets clogged really quickly.
same for all others besides OEM that Ive seen

my OEM lasted 5 years
68913, RE: Very close....O2 Sensors...
Posted by Avenger, Feb-20-04 12:52 PM
www.oxygensensors.com

$58 and comes with the proper harness ... no splicing wires.

EDIT: In case you can't find it ... Year -> Mitsubshi -> Eclipse -> L4-2.0L (A588). You'll understand when you try to look it up.