| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Taking out and installing injectors problem.. please help |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=67258 |
67258, Taking out and installing injectors problem.. please help
Posted by Dualgen2, Jan-24-04 08:27 AM
My friends and I are taking my turbo kit off now and we are stuck on swaping the injectors now. Whats holding the fuel rail down. Whats the easiest way to swap the injectors. Thank you
-Dave
|
67259, RE: Taking out and installing injectors problem.. please help
Posted by DarkOne, Jan-24-04 08:56 AM
two 13mm bolts on the back.
|
67260, RE: Taking out and installing injectors problem.. please help
Posted by Dualgen2, Jan-24-04 09:06 AM
sorry Dino. I was in a hurry cause Im trying to get my car done before my work closes. Took off valve cover and already switched them. Thanks anyways.
-Dave
|
67263, RE: Taking out and installing injectors problem.. please help
Posted by stv, Jan-24-04 09:55 AM
be careful, those 2 fuckers are easy to strip.. I dont know the torque on them, but I stripped one of mine very easily...g'luck
|
67274, RE: Taking out and installing injectors problem.. please help
Posted by WickedESi, Jan-24-04 11:51 AM
I don't know the torque off the top of my head, but that's one you want to get out of the Chilton's manual, because as you tighten those all your o-rings get smashed.
|
67276, RE: Taking out and installing injectors problem.. please help
Posted by DarkOne, Jan-24-04 12:10 PM
Originally posted by WickedESi
I don't know the torque off the top of my head, but that's one you want to get out of the Chilton's manual, because as you tighten those all your o-rings get smashed.
As long as you have the injectors properly seated prior to torqueing those blts, that isn't the case. e.g. Do it right and that won't happen.
|