| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | What should i do with ny car??? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=67052 |
67052, What should i do with ny car??? Posted by titogs95, Jan-20-04 06:15 PM
What's up!!!!
HELP ME HERE Well recently i am depress with my babe is not as good as used to be. It is going to have 120.000 milles. I travel a lot in the highway so that is way. It still goes to 120 milles but take it so long to get there. Also, the other problem is that it burning oil (i think is the rings) ,the car shakes (must be the mounts). And the main PROBLEM is Too SLOW to start. There is a lost of power before 4000 rpms. Actually i don't know what to do!
Maybe rebuild the block of the 420A
But i will like to change it for another car! Maybe a Gs-T 97 or a Gsx 95.
So, guys give me your opinions!
take it easy on the cars!
Tito
|
67168, RE: What should i do with my car??? Posted by titogs95, Jan-22-04 09:06 AM
C'mon, 15 people and nobody can leave and opinion?x( May i have a little opinion or support arround here??? :wary
I am trying to see what to do with this car. Maybe i will swap the a rebuild bottom engine after all! Should, i do it or it is just a waste of money?
tito
|
67173, RE: What should i do with my car??? Posted by redeclipset, Jan-22-04 09:54 AM
if your getting a new 2g get a gsx. If not get a new engine built by fty and go turbo.:thumbsup
|
67175, RE: What should i do with my car??? Posted by bullox, Jan-22-04 10:32 AM
if you think getting a 2g turbo is going to help your reliability issues, you have another thing coming. They are just as bad as the 420a, if not worse.
|
67211, RE: What should i do with my car??? Posted by luchinlb, Jan-23-04 06:13 AM
Zup.
I have one litle question....
FTY = Faster Than You ????
If it is like that....Do they have a website or something...
Is there any other place where i can get an excellent 2 hand engine?? ( give me some web sites please)
Thanx for your help...
|
67212, RE: What should i do with ny car??? Posted by DR1665, Jan-23-04 07:21 AM
Originally posted by titogs95 burning oil (i think is the rings) - do a compression test. find out if the oil is slipping past the rings, or the valves (as in head work or bottom end rebuild)
the car shakes (must be the mounts). - when? Idle? low speeds? highway speeds? at idle, I would think mounts, otherwise maybe wheels or brakes.
And the main PROBLEM is Too SLOW to start. - as in starting the engine? battery or starter. - as in getting moving?
There is a lost of power before 4000 rpms. - so maybe you meant slow to start as in slow to get up to 4000rpm. Could be lots of little things. Try doing a basic tune up with new plugs, wires, fuel filter, air filter and see what happens. 120k is getting old and I'm sure she's going to start to show her years, but she's got a ways to go imo.
|
67216, RE: What should i do with ny car??? Posted by jsupetran, Jan-23-04 08:52 AM
If you have some emotional attachment to it, then keep and do a rebuild. If not, upgrade time baby; 350z imo :). It depends on what your current options are really, and what you can afford.
-------jezreel hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting :thumbsup
|
67385, RE: What should i do with my car??? Posted by titogs95, Jan-27-04 03:03 AM
Hey, guys thanks a lot for the support! I apreciate all the information. I think i am going to sell this babe. But my problem is that "will i get something better than this???". That is the only thing that holds me.
:)
Anyway in response of a post:
Originally posted by DR1665
burning oil (i think is the rings) - do a compression test. find out if the oil is slipping past the rings, or the valves (as in head work or bottom end rebuild)
"""The compresion test was done and it came arround 180, 170, 180, 170. (something arround that). SO, must be the valves!"""
the car shakes (must be the mounts). - when? Idle? low speeds? highway speeds? at idle, I would think mounts, otherwise maybe wheels or brakes.
""""the car shakes when i am in low iddle arround 900-1000 rpms. It sound like bum-bum-bum- but fast""""
And the main PROBLEM is Too SLOW to start. - as in starting the engine? battery or starter. - as in getting moving?
"""" when i mean to start i meant to launch tha car it always goes and in some point the power shutdown and come backa like nothing (it is like you start and remove the foot of the pedal and them u put it back.)""""
There is a lost of power before 4000 rpms. - so maybe you meant slow to start as in slow to get up to 4000rpm. Could be lots of little things. Try doing a basic tune up with new plugs, wires, fuel filter, air filter and see what happens. 120k is getting old and I'm sure she's going to start to show her years, but she's got a ways to go imo. """" thanks and i think that it is what it is. I treat the car really bad (agressive driver). But i will do those think to see what it is.""""""
Thanks a lot to everybody who wrote me back. Thanks and take it easy on the cars!!!!
Tito.
| |