| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Help!!! overheating |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=67032 |
67032, Help!!! overheating Posted by taloniized, Jan-20-04 02:50 PM
I was driving normally down the street (not really boosting) and it starting smoking under the hood. I pull over right away and see that my top radiator hose slipped off the radiator. i filled it up again and started her right up and it's still overheating. i just checked my thermostat and that was good. what could it be? the radiator? the radiator has 98,000 miles on it. plus both fans still work on the radiator if that means anything.
|
67042, RE: Help!!! overheating Posted by ajna_star, Jan-20-04 04:54 PM
cap?
|
67056, RE: Help!!! overheating Posted by Initial DSM, Jan-20-04 06:50 PM
Besides the cap, flush the radiator and check the all the hoses for any clogs or residue stuck inside.
|
67088, RE: Help!!! overheating Posted by fly1, Jan-21-04 11:31 AM
Like ^^ said, I'd do a flush and fill, and check all the other heater lines for any leak(s). How much time did you allow the car to cool after this happened?
|
67140, RE: Help!!! overheating Posted by FarOutKucki, Jan-21-04 08:44 PM
replace the radiator cap before you do anything else.
|
67154, RE: Help!!! overheating Posted by taloniized, Jan-22-04 05:32 AM
Originally posted by FarOutKucki replace the radiator cap before you do anything else.
damn, i just drained the coolant last night too. i'm going to pull the radiator today to check that out.
|
67156, RE: Help!!! overheating Posted by WickedESi, Jan-22-04 05:36 AM
The cap controls the pressure. I second changing it first.
|
67177, RE: Help!!! overheating Posted by taloniized, Jan-22-04 10:55 AM
just found out what it was. fluid was getting through my exhaust system.
|
67187, RE: Help!!! overheating Posted by 2GNTnVy, Jan-22-04 12:11 PM
Fluid in the exhaust system? Sounds like something could be wrong with the headgasket. If all else fails try a compression test to see if all the cylinders are within spec.
|