| Go back to previous topic | |
| Forum name | Performance/Engine |
| Topic subject | Motor swap question |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=66968 |
|
66968, Motor swap question Posted by myslow1, Jan-19-04 07:49 PM Ok im sure this question has been asked a million times (sorry) but, if i had a GS-T that was any of 95-99 with the 4g63t would a JDM 4g63 cyclone motor fit into the car if not why and if so what entails. If that motor does not fit then where would a good place be to get a JDM 4g63t motor and transmission? | |
|
66969, RE: Motor swap question Posted by silvreclipsers, Jan-19-04 08:01 PM nm | |
|
66972, RE: Motor swap question Posted by DSMRoadster, Jan-19-04 08:45 PM should swap right in. | |
|
66983, RE: Motor swap question Posted by DarkOne, Jan-20-04 03:45 AM Should. Ask at DSMTalk. (SEARCH FIRST!) | |
|
66986, RE: Motor swap question Posted by etx, Jan-20-04 04:56 AM | |
|
66992, RE: Motor swap question Posted by SILVERNT, Jan-20-04 05:57 AM any 4g63 block will drop right in a gst. if you are getting the cyclone 4g63 from an evo, make sure you get the earlier model engines because you can use the head from the evo. (evo6-8 have the intake manifold pointing to the left side of the car rather than right like eclipses) all the mounts bolt right up. | |
|
66993, RE: Motor swap question Posted by a_miller_76, Jan-20-04 06:25 AM I thought the only difference in teh cyclone and the regular 4g63 was the head and intake manifold/tb? | |
|
66999, RE: Motor swap question Posted by myslow1, Jan-20-04 08:08 AM ok that is what i thought i was just making sure because i am getting rid of my car and buying a GS-t i just wanted to make sure that a 6-bolt 4g63t motor would go in | |
|
67018, RE: Motor swap question Posted by Remy, Jan-20-04 12:45 PM Will drop right in but its a complete waste of money. | |
|
67034, RE: Motor swap question Posted by myslow1, Jan-20-04 03:48 PM really? i would have to disagree since the motor in it has 120,000 miles on it | |
|
67033, RE: Motor swap question Posted by myslow1, Jan-20-04 03:48 PM really? i would have to disagree since the motor in it has 120,000 miles on it | |
|
67038, RE: Motor swap question Posted by JWoodley, Jan-20-04 04:29 PM dont waste ur money on a "JDM swap". get a 1G head, intake mani, and TB. i'd try to get the head from a 1G 5speed as their cams are more aggressive than the auto cams. With all the money you are saving, port the head and intake and strap on a 14B and you're all set for under $500 if you make this a DIY project. | |
|
67055, RE: Motor swap question Posted by Initial DSM, Jan-20-04 06:47 PM Mitsubishigraveyard.com will find you an 87' Galant 6 bolt block (actually, a complete engine-but the heads useless) for $350, if you ever thinking of swapping the block as well. | |
