Ok ive searched and asked some people about this but am not sure what to do. I have a modified jeep tb waiting to install. The stock tb has a nipple with a vac hose i think coming off of it. There is no such nipple on the jeep tb so what do i do with this? T it off another line? TIA

I think either MetalJim or NappyJim or some other guy around here named Jim has a link to it in his sig. You might find either of them in the advanced forum or you could just search the profiles. I'd link you, but I'm too lazy to search. :P

Originally posted by DR1665
I think either MetalJim or NappyJim or some other guy around here named Jim

it's DRJIM1665234976249.736



_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

I T'd mine off and its fine.

I'd still like to see what Jim says. but i havent had any problems.

metaljim

I read the writeup that someone made on it, i think jim did it and it didnt say in there that i saw so i guess ill just T it off. Thanks

Sorry bout the late reply. Check my sig for the writeup.

That vac nipple is for the EVAP system....and you got it right - run it to somewhere else on the intake manifold. I ran mine to a free port on the left hand back-side of the manifold.


95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Excellent glad I did it right then. I just finished it and WOW its a very noticable difference. I didnt have time to put my extrude honed and portmatched top intake mani on but even just the tb I could tell a big difference. Throttle response is a lot better. :thumbsup :cheers