| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | 9k tach on at | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=64843 |
64843, 9k tach on at Posted by shybuck, Dec-16-03 03:47 PM
I have a 9k tach for a 5 speed, can I use it on my AT which has a factory tach of 8k? If yes, will it just bolt right in and go or do I have to rewire etc.
|
64844, RE: 9k tach on at Posted by totaleklipse97, Dec-16-03 03:53 PM
should bolt right in, no problems as far as i know. The turbo gauges are a little different i do believe but... all the n/t's are the same (turbo being different becuase of additional oil and boost gauge)

VW= The joy of driving DSM= The frustration of fixing
|
64864, RE: 9k tach on at Posted by Chamuko, Dec-16-03 08:36 PM
I think what he was asking if if it will show the rpms coreectly since There will be 9k instead of 8K. Im sorry I cant answer that , but i would like to know that as well.
|
64866, RE: 9k tach on at Posted by AznKaos15, Dec-16-03 10:54 PM
technically speaking, it would NOT work. if you use a 9k tach on a NT(8k) the rpm would read higher than what it actually is. ntat max out at about 6.5k now if you use a 9k tach on it, it would look like its going to max at 7-7.5k. then again, this is technically speaking since i do not think the 9k tach is bigger to compensate for the extra grand and the fact that some of you say it will bolt right up just says its the same size.
|
64867, RE: 9k tach on at Posted by widebodied, Dec-17-03 02:14 AM
why would u even go threw the hassle, either way u look at it, your taching 7200 still.
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
2000 Yamaha R-1, 165rwhp 117 ftlbs tq
|
64893, RE: 9k tach on at Posted by WickedESi, Dec-17-03 10:13 AM
It will work. The voltage input is still the same on A/T's M/T's, the tach output's it differen't.
|
64894, RE: 9k tach on at Posted by python6586, Dec-17-03 10:37 AM
yea i think it would work too, as long as u replaced the whole cluster and not just the overlays because the cluster would read the signal differently so it would show the correct rpm
 Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
|
64895, RE: 9k tach on at Posted by WickedESi, Dec-17-03 11:05 AM
Yeah, my response above is under the impression that he's replace the whole tach unit, and not the overlay.
|
64896, RE: 9k tach on at Posted by shybuck, Dec-17-03 11:52 AM
yeah I want to remove my 8k tach completly and install the 9k tach completly. I just looks better showing 9k, and it only takes about 5 mins to do.
|
64905, RE: 9k tach on at Posted by AznKaos15, Dec-17-03 02:05 PM
oh ok, i thought it was just the overlays. sorry.
| |