| Go back to previous topic | |
| Forum name | Performance/Engine |
| Topic subject | place to get o2 sensor |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=6257 |
|
6257, place to get o2 sensor Posted by slacker911, Nov-05-01 07:50 AM Anybody know the cheapest place to get a new o2 sensor. There like 100 bux any help would be appreciated. Also I need it by saturday if at all possibe because mine is dead and would like to replace it asap. Any hints on installing it would help too. | |
|
6258, RE: place to get o2 sensor Posted by vegasdsmr, Nov-05-01 07:54 AM go to an auto parts store, and get the bosch universal one. i think you will need a 22mm hex wrench to get the old one off, and maybe sum wd-40 or rust eater. it took me a good 20 minutes of strugglin to get my 2nd o2 sensor out, so use the rust eater. | |
|
6259, RE: place to get o2 sensor Posted by RxR_Eclipse, Nov-05-01 08:24 AM Order it from nopi. They carry the NGK replacemant 38.00 + about 5.00 in shipping. | |
|
6260, RE: place to get o2 sensor Posted by Ichiban, Nov-05-01 09:11 AM Do you know what the nopi part number is? I can't seem to find it in the E-cat. What category is it in? | |
|
6261, RE: place to get o2 sensor Posted by Ichiban, Nov-05-01 09:13 AM Never mind, I found it. If you look under 99 model, it's not shown in the pull down menu. | |
|
6262, RE: place to get o2 sensor Posted by slacker911, Nov-05-01 11:37 AM I can't find the NGK one it is like an NTK or something even the pic of the box says it. Are these good? Thanx for all the help. | |
|
6263, RE: place to get o2 sensor Posted by slacker911, Nov-05-01 12:41 PM Oh yeah I am assuming I just need the one in the manifold correct? | |
|
6264, RE: place to get o2 sensor Posted by Super20G, Nov-05-01 01:29 PM 38 bux, hell yah, its either that or the bosch universal thats 70 bux or the factory mitsu one thats like 170 bux... I think I'll try one of those cheap ones and see if it works. Are they 4 wire or 3 wire? Right now I have the bosch one in my downpipe, used for my A/F gauge only. Then I have the 2 factory ones. I am gonna unhook the 2 factory ones and replace my worn out bosch one, then wire it to be the factory before-cat one, and tap the A/F signal wire on it too. I guess I dont need to replace the after-cat one since I dont have a cat anyway. And I dont think the PCM uses the after-cat one for trim values anyways, just monitors the efficiency of the catalyst, right? Will this work ok? | |
|
6265, RE: place to get o2 sensor Posted by slacker911, Nov-05-01 02:07 PM What is the diff between 3 or 4 wire? | |
|
6266, RE: place to get o2 sensor Posted by eclipse804, Nov-05-01 02:14 PM Is that even the o2 sensor for our nonturbos? Or is it for the 2.0L turbo 4g63? It only says 2.0L on the Nopi site here | |
|
6267, RE: place to get o2 sensor Posted by eclipse804, Nov-05-01 05:51 PM Anyone know for sure if that Nopi part is for the 420a 2.0L or the 4g63 2.0L? It doesn't say on the Nopi site. | |
|
6268, RE: place to get o2 sensor Posted by slacker911, Nov-06-01 05:51 AM To The Top | |
|
6269, RE: place to get o2 sensor Posted by jZa, Nov-06-01 07:26 AM ntk is the oxygen sensor (don't know if any other sensors) division of ngk. At that price i'm assuming its universal, so either motor (unless they have different kinds). | |
|
6270, RE: place to get o2 sensor Posted by eclipse804, Nov-06-01 07:43 AM So would that universal o2 sensor even plug directly into our cars?? It's not worth the hassle to save 30 bucks with ntk if I can get a direct replacement one that requires no modification. Any info?? | |
