2GNT.com Forums - Printer friendly page, topic ID #62349 -

Go back to previous topic
Forum name	Performance/Engine
Topic subject	ATTN!!!! Piston People, can you tell me the bore of these pistons?
Topic URL	https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=62349
62349, ATTN!!!! Piston People, can you tell me the bore of these pistons? Posted by Collente, Oct-30-03 11:58 AM I asked the guy the bore of the pistons he is selling me and this was his reply: Piston Type: Dish Bore: 3.464 Stroke: 3.268 Rod Length: 5.470 Dish Depth: .020 Comp Dist: 1.23 Int. .120 Ext. .120 25 Valve Pocket Measured from deck Anyone know what bore that is? Thanks! Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>?
62353, RE: ATTN!!!! Piston People, can you tell me the bore of these pistons? Posted by Avenger, Oct-30-03 11:50 AM Uhh ... just a guess ... Bore: 3.464 :wary
62354, RE: ATTN!!!! Piston People, can you tell me the bore of these pistons? Posted by Collente, Oct-30-03 11:55 AM Lol thx man... I was wonering what the bore is out of that. Is that our stock bore? Or is that .020 over? Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>?
62358, RE: ATTN!!!! Piston People, can you tell me the bore of these pistons? Posted by Michael_97RS, Oct-30-03 11:57 AM That's a .020" overbore. 15.9 @ 86.7mph http://www.exileracing.com Mods List: http://highlander.dsmpower.com/sig.htm
62356, RE: ATTN!!!! Piston People, can you tell me the bore of these pistons? Posted by Michael_97RS, Oct-30-03 11:55 AM I hope you don't really mean what bore is that, since you listed the bore spec. But I assume you mean compression ratio? In which case if it;s a standard piston and not a custom job, beind a dished piston it should be 8.8:1. 15.9 @ 86.7mph http://www.exileracing.com Mods List: http://highlander.dsmpower.com/sig.htm