When cranking the motor over it gets 30psi throw my turbo line the gauge was finger tight.(fuel pressure gauge screwed on finger tight my oil gauge is not working). is this ok

And second should oil squirt outta the cam cap by the cam sensor it was running back into the head. should it squrit of should it not leak at all. thanks

Should oil squirt out of the cam cap? Oil shouldn't squirt out of anywhere! If you are leaking oil from the cam cap, then you have a problem. Perhaps you are pressurizing your valve cover (through the PCV line or something else). All of the AN style oil lines should be snug, but not tight. They seal using two matching beveled surfaces that don't need much pressure to seal up. NPT style connections should be tight (oil sender and tee). They require teflon sealant and must be tightened down pretty good.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire