i dont know if u guys have ever seen this before (more than likely uo have) but i found this powercoating site that does the 420a valve covers in some pretty sick colors....check it out, some of my favs:

black chrome:


red baron:


forrest green:


heres the website:
http://www.acbcpowdercoating.com/samples.htm#420A
_________
96 talon esi-t
san clemente, ca

Uberingram> I bow down to the Geo

Well, they look pretty good, but that green one is ugly! I kind of like my blue one!

have u ever seen a green valve cover in real life? i bet it would look sick....original to say the least but hey, if someone is goin for a green theme (?) then it works

edit: yea that blue one looks sick!!! i just got my racing hart c3 evo's powdercoated gunmetal and OOOOOOMG....pimpest rims EVER
_________
96 talon esi-t
san clemente, ca

Uberingram> I bow down to the Geo

just wondering if it would be possible to grind/shave the doch 2.0 ect down to flat, then possibly etch in somthing, like eclipse or RS-T or perhaps ur user name here...

i dunno i think RS-T would look awesome (as long as u have an RS-t of course) very origional...

WTB: Dodge Omni


http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html

mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture

Yeah I don't like any of the colors really. If only the had a darker candy blue.

Jerseys VC looks like a jewel among vlave covers. OMG tightness! ;)

If I knew about that site before, I woulda bought the red one.
Too bad the SRT-4 ones dont fit too well. They come powdercoated too.
Oh well, ..I kinda still like mine I guess.

dont the hondas that are hybrids or more efficient come with a green VC or something? or was it toyota? i dunno...

Yes acbc Does awesome work...

Bill

>just wondering if it would be possible to grind/shave the
>doch 2.0 ect down to flat, then possibly etch in somthing,
>like eclipse or RS-T or perhaps ur user name here..

cant remember the web address, but i ran across one last week that sold our valve covers powdercoated in different colors and it showed a chrome one that you could get that didnt have the lettering on it. I've seen one in person tho and didn't really care for it. IMO it just seamed to be misssing something...but then again that's cuz it was.

do you have to send them your valve cover or will you have to buy a new one.

Ok, I just emailed them to see if they could possibly do my vc in a darker more closer to my paint color candy blue. Hopefully they respond.

i'm goin to be doin sumin a lil differant like a chrome VC with blue powder coated numbers and letters ... but yea ...i like jerseystyle1's VC i'm goin to do right the oppisite



cai,p&p tb,msd coil pack and 8.5mm wires,plat+4 plugs,header,high flow cat,dual dtm styl muffler,final gear mod,and shift kit

i think if u could get something etched or engraved a little bit into a plain v/c then that would look tight, especially RS-T (if your RS turbo'd) or 2GNT or sumthin... that would look good IMO

later

WTB: Dodge Omni


http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html

mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture

yea...i'm think about doin that too...i cant make up my mind on what to do...i can have a stock VC,a chrome with blue letters and numbers,and a blue one with RS~T laser etched in it...i have 3 VC to play with


cai,p&p tb,msd coil pack and 8.5mm wires,plat+4 plugs,header,high flow cat,dual dtm styl muffler,final gear mod,and shift kit

The 2.0l DOHC 420a that comes on the neon comes smoothe. You could probably get on a neon site and trade for one of thiers. I am sure someone on there would like to have one of ours. Here are pics of it from the acbc site.

Jon 95greenhrcgs has 2.2L stroker on his. im sure u can find pics. very badass IMO.

>The 2.0l DOHC 420a that comes on the neon comes smoothe. You
>could probably get on a neon site and trade for one of thiers.
> I am sure someone on there would like to have one of ours.

We shave a lot of valve covers for customers then either polish/powder coat it depending on what they want. So that might be another option for someone who is interested.

Also, if you'd like another quote on some powder coating... whether it's a basic color or custom, feel free to drop me an email. I'm always glad to answer questions and work with you to get the result you're looking for.

Scott

>i'm goin to be doin sumin a lil differant like a chrome VC
>with blue powder coated numbers and letters ...

Soo...like the valve cover on the fast and the furious eclipse? I thought you said something different... :) just playin man.

Someone on here has the 2.7l stroked 2.4 engine with a custom vc that says 2.7 and the company that did the work...was it bryndeeen?

>Someone on here has the 2.7l stroked 2.4 engine with a custom
>vc that says 2.7 and the company that did the work...was it
>bryndeeen?

It was. But I believe it was a 2.6...call me out if I'm wrong though. It was definitely him though.

don't you mean BRYDEN? :P



-Tony
98'GST
92'TSI-AWD

eclipzgst@charter.net
http://eclipzgst.webhop.net
http://www.newengdsm.org/

turboclipz on AIM

i want some pics!!! i want to do a shaved and etched then powdercoated black and the etch polished how much about would i be looking at? thanks

WTB: Dodge Omni


http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html

mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture

here ya go...




WTB:
--bolt on turbo kit (star, hahn, etc.)
--rear drum to disc set up
--internals
---------------HOLLA!!!

the black chrome one is off the shiznat!!