I was putting my header back on and one of the threads to the head got f**** up.;( The holes threads are no more. I put the header back on and no leaks that i can tell. I know this is not good so i was thinking of taping the hole to make new threads. Does any body know how to do this? Or should i take it to a shop to do it?
Thanks

you can retap the holes on the head with a tap i will get ya the size in the morning
later
"Z"

You "may" be able to tap the hole, if there's enough aluminum left to cut with a tap. If you notyou will nood to drill out the hole, tap it a larger size and use a helicoil to get back to the proper size for your exhaust mani bolts.

M8x 1.25 I believe for the tap size.



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

thats the right size....I did that to my head too :( but luckily the tap cleaned it out enough so i didnt have to drill it out and make it bigger. *whew*

yo man tell me what size u need and ill hook u up for free, no bullshit i'd be happy to

Thanks guys:thumbsup :thumbsup
M8x 1.25 If U can hook me up thats cool as hell dude