| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | I need your help right now!! Can you tell me what is causing this!! | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=58633 |
58633, I need your help right now!! Can you tell me what is causing this!!
Posted by Scarface, Sep-06-03 08:40 AM
Ok, when I push my clutch pedal to the floor, the pedal starts to vibrate a little, and a squeak comes from my slave cylinder by where it goes into the tranny. The squeaks doesn't go away and gets louder wehen you pump the clutch pedal. What can be causing this. The pedal hold pressure in the master cylinder and there are no visible leaks anywhere. Just the squeak by the slave cylinder and when I push the clutch the vibrations and the squeaks. Please help a brother out. You guys are the shit:thumbsup
|
58637, RE: I need your help right now!! Can you tell me what is causing this!!
Posted by Eclipse97, Sep-06-03 09:50 AM
throw-out baring?
|
58647, RE: I need your help right now!! Can you tell me what is causing this!!
Posted by WickedESi, Sep-06-03 11:53 AM
Definnatly your throw out bearing.
|
58652, RE: I need your help right now!! Can you tell me what is causing this!!
Posted by DR1665, Sep-06-03 04:32 PM
If it's the throwout bearing, you're in for some long hours of work. I might try to bleed the clutch first. You'll need a buddy, a Chilton's manual, and a bottle of fresh, clean fluid. We did mine after the rebuild and found all kinds of sludge in there. Maybe sludge building up and interfering with the operation?
Just a thought.
Good luck sir.
| |