| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Crower cams.. | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=5629 |
5629, Crower cams..
Posted by RAIZIN, Aug-29-01 10:07 AM
I pretty much found a buyer for the cams.. but I thought I'd share this.
|
5630, RE: Crower cams..
Posted by GTAGRIP, Aug-29-01 03:57 PM
Well if that deal falls through e-mail me and I'll take them. Shit looks like I have been late on both things that you were selling. THAT SUCKS
Jimmy Kost
1999 Eclipse RS (White)
Overland Park KS
jkost1@yahoo.com
|
5631, RE: Crower cams..
Posted by SEA97GS, Aug-30-01 02:17 AM
Trust me, this deal isn't going to fall through. I've got the money order sitting next to me waiting to go out once the cams get to my house!!!!
Of course, I will post once they get installed and ran at the track.
SEA97GS - 15.785@88.20MPH
NW.DSM.ORG
HotShot Headers
Custom 2.5" exhaust
IceMan full stack intake
MSD 8.5mm Superconductor plug wires
NGK "6" Plugs
AFX underdrive pulley
AFX solid motor mount
Nitto NT555R Drag Radials on 3G RX-7 wheels
Eibach ProKit Springs
Tokico shocks
front upper STB
rear upper STB
Soon to have.....Apex-i Super AFC, Crower Cams
|
5632, RE: Crower cams..
Posted by Michael_97RS, Aug-30-01 02:29 AM
Speaking of installs... did you ever get the MSD put in? And on a side note... you are really going to like the S-AFc... such a cool toy.
"I've always accepted as a responsibility that the things in life that I need and, more importantly, the things that I want, I should provide myself." - Rush Limbaugh
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/
Injen CAI, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, NRG Susp. Motor Mount Inserts, Red Silicone Hoses, 8.5mm Magnecor Wires, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, SS Clutch Line
To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and Carbon Fiber Pads, EGT, Hooker 4-1 Header
Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold
|
5633, RE: Crower cams..
Posted by SEA97GS, Aug-30-01 03:04 AM
Nope. Didn't install it. I traded it for the S-AFC. But then I found I need more parts now!!! LOL New O2 sensor, A/F guage, and I really should get an EGT so I don't blow it all to hell. If you have some settings that I can try, send those over to me.
It looks like I'm going to save up for one of those Howell bottom end rebuild kits, but I don't know that I like the JE pistons. I've heard that they slap around in the piston bore.
SEA97GS - 15.785@88.20MPH
NW.DSM.ORG
HotShot Headers
Custom 2.5" exhaust
IceMan full stack intake
MSD 8.5mm Superconductor plug wires
NGK "6" Plugs
AFX underdrive pulley
AFX solid motor mount
Nitto NT555R Drag Radials on 3G RX-7 wheels
Eibach ProKit Springs
Tokico shocks
front upper STB
rear upper STB
Soon to have.....Apex-i Super AFC, Crower Cams
|
5634, RE: Crower cams..
Posted by Michael_97RS, Aug-30-01 03:10 AM
I run 3 to 5% lean. But I haven't installed my EGT yet, so I'm staying on the conservative side until that is done. Should be in by the 14th (I hope)
"I've always accepted as a responsibility that the things in life that I need and, more importantly, the things that I want, I should provide myself." - Rush Limbaugh
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/
Injen CAI, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, NRG Susp. Motor Mount Inserts, Red Silicone Hoses, 8.5mm Magnecor Wires, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, SS Clutch Line
To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and Carbon Fiber Pads, EGT, Hooker 4-1 Header
Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold
| |