i've searched everywhere, and used alot of different diagram's... so far no luck. im having trouble with my rpm signal... i used the avenger's site that say's connect a white wire that's a solid white, and i don't have that, so that's why i ask 95 2gNT owner's did you have a solid white wire? the closest thing i have to white, is a white wire with a solid black line, white wire with solid yellow line, white wire with a solid red line, 2 white wire's with 2 red dotted seperated lines. i can't seem to find a SOLID white wire... please help me asap, i started this last night at 4am... and im still trying to figure it out. please also e-mail me at a5ian5murf@yahoo.com if you want. thanks alot people, hopefully yall can help me, LMK 95' 2gNT's!!! thanks!

Dude look for this...count the pins if it helps.

RPM: pin 73 (bottom harness) white wire - Green Wire on s-afc


Good Luck:thumbsup

FnNitWit81, i cannot count 73 pins, i only have 60 pins total... what do they mean by bottom harness? lmk thanks, 2gNT 95's where yall at...?

he doesnt have a pin 72 on a 95.

here is a write up from corbins page on the 95 ecu pin's:

http://www.2gnt.com/www/corbin/95ECU.html

according to it, pin 8 sir

i spliced into the two white wires with tiny red lines, one wasn't it and one actually read a little but isn't consistant. i dont think it's the right one... but it does read, and that's odd. but come on 95 2gNT people, lmk i need help quick!

Man i just gave you your answer...also make sure all your settings are correct on SAFC..like CYL, up arrow, and pressure set to 5-5, or 6-6, or 7-7 not that I think pressure values will caus it but make sure all your settings are correct...just try what I said.

If you flip bottom harness plug upside down and look at teh plug it self..it has littel numbers on it..grab the correct number and splice into that number....


Good luck man hit me up on aim if you need help....:thumbsup

dude its a solid white wire............look on the bottem part of the harness facing the headlights....just hooked up my shifty light, hope this helps bro im me at jdm95gs if ya need more help:thumbsup

Yeah, you gotta really dig through the spaghetti, but it should be in there - a solid white wire. There's only one solid white wire. I'm 95. I found it and it works great for me(even better than the dash tach). Also, they changed the ECU from year to year, but not the harness color for the tach. There's only one solid white wire in that mess no matter what year you are...and it's the tach.


95 Eclipse RS : 5 speed
15.901 @ 88.34mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

hmm guy's... can't seem to find it yet... would you guy's possibly take pics for me...?

i seriously hope im not the only one missing that damn white wire on the bottom somewhere.. i have like a couple white wires down there, but they have yellow or blue stripes in them... this is getting frustrating, please lmk if you can further help me guy's... everything works fine except for the rpms, and i really need that to work cause my dash rpm dosen't work at all. lmk guy's thanks again.

Damnit! now my AFl dosen't work now???? geez... lmk asap thanks guys