i was wondering if you could post some pics of the fields afc wire diagram, i need to know where what wires go, i dont have the harness, i just hae sodred wires in the back,,
please help

bump, sorry for the fast bump, but i need info asap

TTTT

Do you mean - how the wires come out of the back of the main unit? I don't have a picture of that, but I can take one. You don't have any wiring harness for this thing right? Did you at least get a plug that would fit the gang connection in the back?


95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Here's what the back of mine looks like. Do you just need the wire colors and where they go - or do you need the whole pinout chart?




95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

omg i know what bump means and does hahah i am so fricking slow.

i need to see the wires out the back and i also need to see where they go to in the car, i am greatful for this

Got it.

I guess the only other thing I could give you is this thread from when I first installed the SFC. Theres a little about the wiring in there.
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=39033&mesg_id=39033&listing_type=search

Anyway - here ya go. I put it in JPEG format so you could just print it out easily...or make it your screensaver or whatever.



95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

so all i need to use is
tach, ingn, sfc1 to map sencor, and sfc 1 to ecu??, and the two ground?

Well the speedo plays a part in the 0-400m et function....but the speedometer will be off. For mine it seems like the speedo is doubled - so for eery 40kmh you're actuall doing 20 kmh. And the o2 sensor you'll probably want to hook up. Its got one of those blinky rich/lean o2 gauges built into it. Red is rich - green is lean. Its nice especially if you don't already have an af gauge.

....and yeah My car is put back together. I've got a shit load of wires under there with the SFC and the remote car starter. Probly an extra pound or 2 in wires. Yankin that shit out to figure out what the wiring wasn't the easist thing I guess...but if it works for you thats great.


95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

so the sfc1 goes to the map sencor wire?
the sfc1 cp- ggoes to what wire in the ecu?
speed goes to - speed sencor? where is that?
speedcp goes to?? where in ecu
ignition_ goes to power source like?
and 02 goes to the sencor in the manifold?

I got all of the wiring colors from the Apex'I install instructions that are listed in the Mods section. Unfortunately none of those links are working right now - so just a little background about which wires you'll be using: Different model years use different ECU pinouts, so the pin for a particular wire changed from one year to the next. The good news is, the wire colors are all the same. So the wires are refferred to by thier color instead of what pin they go to on the ECU.

So for:
o2 - splice into the WHITE with BLACK stripe wire

speed - splice into the YELLOW with WHITE stripe wire

speed-cp - don't use this wire. You don't have a speed limiter. If you did have a speed limiter you would cut the Y/W wire at the ECU, attach the speed pin to the wire coming from the harness, and the speed-cp pin to the wire going to the ECU....but don't do this. You don't have a speed limiter.

tach - splice into the WHITE wire

sfc1 and sfc1-cp - These will use the YELLOW with BLACK stripe wire. Cut the wire at the ECU. Run the SFC1 pin to the wire that comes from the wiring harness. Run the SFC1-CP pin to the wire that goes into the ECU.

For the ignition power source I just used the fuse labled ELC-4. It cames on when you turn the key. Any circuit that comes on when you turn the key on will work.


95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

bump...

Hey Billy, just wondring if you got it working?


95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

i will try it tonight, but i think i get it now, thank you alot