Hey guys I need help here, I'm about to get a ported and polished head off a buddy of mine. Can anyone tell me what gains I will see, and offer any opinion and advice as to what I should do to this head....Also what I need to make this happen and what I should buy for it....

He also said it might have a 3 way valve job done, I have no idea what this is or what to look for to make sure...

Please guys help me out...

I'm about to make a move on my engine....}(

Wish Me Luck:thumbsup

Its a 3 angle valve job(not being a prick just letting you know) and it on port side of the valve. The 3 angle means there are 3 different degrees ground in to the valve to promote faster flow into the chamber example 35 to 45 to 50 deg. of slope.
As for the head what cams are you using? You should also find out if the compression has been raised either by filling the chambers(adding aluminum by welding it in and machining it smooth) or milling or plaining the head(machine the cumbustion side of the head to raise comp.)
You should also look at your mods you have to make it work well and get the full potetial make sure all your supporting mods are done first.Good Luck!

Yeh this is why I'm asking for help...Please keep it comming guys...I need all the info I can get. And thanks for the correction, I knew what a 3 angle valve job was I just typed it wrong.

Do it :thumbsup


95 Eclipse RS : 5 speed
15.943 @ 86.48mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

You should be banned till I get my TB!!!!!! How do you have the balls to post here after screwing people over?

I never screwed you over you will be gettin a full refund...now please, leave me alone, gimme your paypal address. I had told you all the damn details. If you would like I can explain how long it took for your basketball personal check to clear...I dont have time for you or your agravation!!


Now please gimme your paypal address so you can get your money back...Sorry 2gnt'ers:nono


Now please let help me with my engine...:thumbsup

LOL @ basketball check........mod money must have ran a little low lol.

Not a conversation for the Performance Section.

Stay on topic.



15.9 @ 86.7mph

Una Salus Victus.

Mods List:
http://highlander.dsmpower.com/sig.htm

slackermotorsports@hotmail.com you have known that e-mail since over 4 months ago. MY check cleared in 7 days I have the papers from the bank it does not take 4 months for you to send something out. You have told me 10 times now you will send it out in a day or two so untill the FULL refund hits my account your still a theif. Sorry mods to do this but this dick has not responded to anything in over a month now.

EDIT don't forget to include another $40 for the stock TB and sensor I had to replace. I don't think you understand that $200 is a huge diffrences to some of us, and the amount of parts and work I have had to put on hold untill I get a good usable TB.

Yes $200 is a lot to me too, but I only want the number mentioned if it's posting the price for a parts review.

locked



15.9 @ 86.7mph

Una Salus Victus.

Mods List:
http://highlander.dsmpower.com/sig.htm