Go back to previous topic
Forum namePerformance/Engine
Topic subjectCel
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=52708
52708, Cel
Posted by daltah, Jun-05-03 01:48 PM
These are the codes that came up p050,p1781,p1782,p1768,p0750 does anyone know what these mean and why my car is check engine light comes on and goes off every other day and when it comes on my car dies and will keep dieing everytime i push in the clutch to stop.
52709, RE: Cel
Posted by juggalo, Jun-05-03 02:57 PM
http://www.2gnt.com/nuke/modules.php?name=Sections&op=viewarticle&artid=8
52714, RE: Cel
Posted by daltah, Jun-05-03 05:20 PM
The codes that came up arent on their
52726, RE: Cel
Posted by juggalo, Jun-05-03 08:05 PM
(assuming p050=p0500) p0500 is no vehicle speed sensor signal, if its p0050 its Heated O2 sensor-heater control unit-bank2 sensor1 and p0750 just says - shift solenoid LR

p1781=pressure switch circuit(OD)
p1782=pressure switch circuit 2-4
p1768=relays always off (relay contacts are stuck open)
52757, RE: Cel
Posted by daltah, Jun-06-03 08:30 AM
what does the p0750 shift solenoid LR mean?I did a manual conversion on my car and replaced the ecu with a manual 99eclipse.And the p1781=pressure switch circuit(OD) is that overdrive?Can this be caused by the manual conversion?my check engine light didnt come on untill # weeks after i had it done>Also where did you get what those codes mean because they are not on that link.Which one of the codes that came up would make my car die everytime i push in the clutch to stop and make my ac not work when im stoped?
52761, RE: Cel
Posted by juggalo, Jun-06-03 09:26 AM
did you remove the ATX ecu. or did you just replace the PCM with a PCM for a manual tranny.
52762, RE: Cel
Posted by juggalo, Jun-06-03 09:32 AM
52763, RE: Cel
Posted by daltah, Jun-06-03 09:37 AM
Its located under the dash on the driverside?What do i have to do to take it apart?If its still in their is that what could be making the check engine light come on?
52767, RE: Cel
Posted by juggalo, Jun-06-03 10:18 AM
yeah thats what controls the AT. just unplug it cause its not getting a signal from anything and tripping the CEL. if you just take off one of the console side panels you'll see it.
52768, RE: Cel
Posted by daltah, Jun-06-03 10:22 AM
Hey thanks for all the help:thumbsup