Can you change the valve springs, lifters, and rockers without taving the head off. I had the cams, cam gears, pistons, and rods replaced. I also did a Valve job, port and polish, sleeve the cylinders, stage 2 turbo kit, starion i/c, 440 injectors, Apexi Super AFC, and a 2 stage NOS Setupand i ran out of money to do the valvetrain. I dont want to have to open the whole engine up again. Thanks for any info you can provide.

Sorry... you'll have to take the head off to get all that done. The valves will only come out the bottom.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

http://members.home.net/xtatdsm




I think he was talking about valve springs, not valves.
you could do all that without taking the head off, it won't be easy, but it's been done.

I think someone did it by stuffing some peace of cloth or something fron the exh runners and turned the crank shaft so the pistons will be pushing the valves (with the help of the peace of cloth) and then making some sortta valve springs compresor tool to take the old springs out and compress the new ones inplace.

but you still have to take the timing belt and the cams off the car tho. I was about to do that myself, but thought the head could use some more milling that's why I took the head off.


Adel

Did you get the cams, springs, and retainers installed? Did you come up with a way to defeat the rev limit? You are installing the same parts I plan on doing soon so I am trying to see how it is all going so I kinda know what to expect. Thanks!



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

Yeah I guess I should read a little better, even then it will be hard. Because like you said there has to be a way to hold the valves up. Then you could rent a valve spring compressor to take them off, and reinstall.

Adel, what valvetrain are you running? crane springs & retainers, SS valves, PT rockers??? or am I wrong?

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

http://members.home.net/xtatdsm




you are almost right.

check here
http://www.2gnt.com/dcforum/DCForumID13/1904.html#7





Adel