Go back to previous topic
Forum namePerformance/Engine
Topic subjectquestion about fuel trims w/ datalogger
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=51676
51676, question about fuel trims w/ datalogger
Posted by tim97rs, May-22-03 05:27 PM
am i supposed to get the LT and ST trims while at idle? is there a set range for "normal" ?

thanks
51713, RE: question about fuel trims w/ datalogger
Posted by Michael_97RS, May-23-03 05:21 AM
Yes there should be a LTFT and STFT at idle. The values depends onthe set up you are running, you just don't want to max out teh values one way or another, between +/-10-15% should be a good range to stay in , max is +/-25%.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC
51719, RE: question about fuel trims w/ datalogger
Posted by Corbin, May-23-03 07:09 AM
You may have already read this page, but just in case...

http://www.2gnt.com/www/corbin/mfi.html

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire