| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | 420a Neon question | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=5136 |
5136, 420a Neon question Posted by Erik, Jul-13-01 03:08 PM
Sorry to post this here but I know this board better. My girlfriend's Neon is doing some wierd sh*t. I put some NGK's and Nology wires(got a reeeeaally good deal),dynomax muffler, and a short intake. When I floor it, it stutters. I can get it to backfire every now and then too. It's fine to drive around but it won't do it everytime. I can't find an RPM it does it at. I thought at first it might be wires, but it would miss at idle too. Feels like it's too rich but how can that be? Thanks!
|
5137, RE: 420a Neon question Posted by JasonESi_T, Jul-13-01 03:46 PM
the wires suck? (just going for a guess, man :-) )
No good spark + no burn = rich conditions....
Jason 98' Eagle Talon ESi-T Mitsu Super 16g Turbo(HRC)/Custom FMIC

http://springfielddsm.homestead.com/JasonsPics.html
|
5138, RE: 420a Neon question Posted by Doug96GS, Jul-13-01 04:16 PM
Maybe you didn't gap your plugs correctly. I bought plugs and gapped them and my car stuttered at anything over 1/2 throttle. I bought Bosch plugs that were pre gapped and since then my car has run fine. Too bad I went through 3 sets of wires and like 120 bucks before I figured out it was just the plugs :)
---------------------- all motor no rice :)

Injen w/K+N Magnecor 8.5's A'pex-i World Sport cat-back Front and rear MachV STB's
|
5139, RE: 420a Neon question Posted by 9D9 MITSU RS, Jul-13-01 06:13 PM
My car did that same shit for a while. I had wires, so I changed the plugs to NGK's. Works fine now. Make sure there is no water on the oil dipstick. If so, head gasket. Check the plug wells out for oil. If there's a lot, maybe a valve cover or spark plug gasket. I installed new plugs gapped to OEM specs and then I tightened the valve cover bolts if they turned any. Fixed it. If none of this helps, I would get it checked.
|
5140, RE: 420a Neon question Posted by Talow79, Jul-14-01 02:43 AM
Its the wires, my freind had a neon that did the same thing!
|
5141, RE: 420a Neon question Posted by Michael_97RS, Jul-16-01 02:38 AM
Yeah I've actually heard bad things about those wires. I have Magnecores on my Eclipse and my Neon and they work good. Check the plug gap, and yes it probably is running rich, but unless you get an S-AFC there's not much you can do about it.
"Claim Victory in your heart, and the universe will follow." Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga Website: http://highlander.dsmpower.com/
Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter
And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT
Waiting for from RRE: Front Lower Tie Bar
Waiting for: Intake Manifold being ported/polished
| |