I wanna check the tranny fluid level, sincy my input shaft seal is leaking.. I found the drain plug, but not the filler plug.. is it the rubber thingie??


ENKEI RP02 17" x 7"
AF/X UDP (still have to install:))
K&N Filter
springs/coilovers (still searchin' :D)





Junoon
97-RS
automotive/industrial design student :-)
Michigan

I assume you mean a 5-spd and yes sir, you are correct.
Joe
97 GS w/ Hahn stage 2
Keep cruisin' & keep the shiny side up.
http://joeseclipse.homestead.com

I need to check my tranny fluid level too!


KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

thanks blkout
what's the easiest way to take it off and fill it, It was not easy at all from the bottom of the car, cuz the drive shaft was coming in the way.. is there any "TRICK" :) to it?? or am I missing something??
thanks.

ENKEI RP02 17" x 7"
AF/X UDP (still have to install:))
K&N Filter
springs/coilovers (still searchin' :D)





Junoon
97-RS
automotive/industrial design student :-)
Michigan

The easiest way that I have found is this...remove the battery (I know it sux), remove the plug and stick your finger in (hehehe) if you can feel fluid then your good to go. If you need to put some in then get a funnel with a long tube on it, stick the tube in the fill hole and fill 'er up! Have someone watch under the car and stop when they see the fluid running out. Good luck.
Joe
97 GS w/ Hahn stage 2
Keep cruisin' & keep the shiny side up.
http://joeseclipse.homestead.com