| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Tapping into O2 Sensor wire??? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=513 |
513, Tapping into O2 Sensor wire???
Posted by Nitrous_RS1997, Apr-12-01 12:31 PM
Im going to install my Autometer A/F gauge tomorrow. to splice into the O2 wire(the white one with a black stripe right?) will one of those plastic crimps you can get at most suto stores to join two wires together work? what has everyone else used? i figured this would be better than taking some of the plastic cover off the o2 wire to get to it. thanks for any help guys.
NitrousEclipse97@aol.com
1997 Eclipse RS
75-shot Nitrous Express(wet)
AEM CAI
Greddy EVO Exhaust
NGK Plugs&Wires(one range colder)
Front/Rear Upper Strut bars
Eibach Pro-Kit springs
Tokico Struts
17" Konig Imagines
Yokohama A520's
http://www.TeamKLR.com
|
514, RE: Tapping into O2 Sensor wire???
Posted by Stan2gnt, Apr-12-01 01:25 PM
Yeah its the white wire with black stripe all yrs. I used one of those plastic connectors that doesn't require cutting the PCM wire just slicing/exposing the wire. I still grabbed the wire from underneath the plastic covering but I was still able to close it back up for the most part with the connector under there.
Stan2gnt
Stan2va@aol.com
95 Talon ES-I-NOS but T soon!
|
515, RE: Tapping into O2 Sensor wire???
Posted by alexries, Apr-12-01 05:18 PM
I also used the plastic crimpin' thing. Works fine.
Coo'
1997 RS
Trust EVO Exhaust
'tis it
|