| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Fuel Pump Install Went Bad!! - Please Help | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=49918 |
49918, Fuel Pump Install Went Bad!! - Please Help
Posted by esseclipse, Apr-27-03 01:33 PM
Well I was installing a Walbro Pump into my 99 Eclipse and when I was pulling the plug out of my existing fuel pump the wires came out the plug part and I got them mixed up. Basicly I mixed up the polarity and started the car. Did this hurt or ruin my fuel pump or anything else? The car is running fine now but I didn't know if me mixing up the wires could have hurt anything.
|
49920, RE: Fuel Pump Install Went Bad!! - Please Help
Posted by Jeff_99gs, Apr-27-03 03:14 PM
If it works now you should be fine. My question though is what mods do you have that you need a walbro? Turbo I hope?
|
49922, RE: Fuel Pump Install Went Bad!! - Please Help
Posted by esseclipse, Apr-27-03 03:32 PM
HRC Stage II, HRC FMIC, Profec B, Missing Link, JE Pistons, Rings, Crower Rod, Crane Turbo Cams, PT style lifters, Crane springs, Extreme Psi under drive pulley, greddy type s bov, Clutch Masters stage IV...thats all I can think of now.
|
49933, RE: Fuel Pump Install Went Bad!! - Please Help
Posted by SPL_Eclipse, Apr-27-03 06:47 PM
i concur w/ jeff, you should be fine. mixing up wires is a no-no, but you got lucky, or so it sounds.
|
49971, RE: Fuel Pump Install Went Bad!! - Please Help
Posted by HadesOmega, Apr-28-03 11:34 AM
well if you hooked it up backwards then I think it'd reverse the flow.
| |