| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Where to get afx UDP |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=49909 |
49909, Where to get afx UDP
Posted by rbenard, Apr-27-03 08:41 AM
Where can I get this? Ive already searched and I couldnt find it. Also where can I get a 55-57 mm throttle body? I just dont know any good Eclipse websites.
|
49910, RE: Where to get afx UDP
Posted by JWoodley, Apr-27-03 08:50 AM
You can get the UDP and the bigger TB from www.howellautomotive.com
goodluck.
|
49913, RE: Where to get afx UDP
Posted by Jayvee, Apr-27-03 11:03 AM
You can also get the UDP from www.Ptuning.com and use your 2GNT discount if you link to it from here, later.
|
49994, RE: Where to get afx UDP
Posted by shybuck, Apr-28-03 02:54 PM
if u use the write up I have a trick that stops the crank from spinning. Nope it is not using a screw driver. I just removed a spark plug and took about 3.5 feet of nylon rope. I put about 2 feet in the hole the plug came out of. This stops the piston from going up all the way and so the crank wont turn and u have 2 hands again. ONLY USE NYLON ROPE, if u use any other kind it will leave fibers on the piston, this could be bad. Nylon will not leave anything behind when u back off crank pulley and pull out rope.
|
49998, RE: Where to get afx UDP
Posted by juggalo, Apr-28-03 03:30 PM
or just use an impact wrench.
|
50044, RE: Where to get afx UDP
Posted by DR1665, Apr-29-03 04:37 AM
update: I inquired yesterday as to where the UDP I ordered two weeks ago from Howell that was "in stock" at the time and "should be there by Friday" was and they said it'll be another 1-2 weeks... They are back ordered. If you're looking for one, I think there's a couple in the FS/WTB forum. :)
|