What stock parts would be needed for this to work and whats the highest rpms these parts handle? I want to be able to rev up to 8200rpms if possible or even 8500. I know that it will not be possible to do this until the AFX ECU comes out (if it really exists) Can anyone that has replaced there valve trains post a parts list? Thanks.



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

LAST EDITED ON 07-Jul-01 AT 05:20 AM (PST)

Here is what I have.
Pt cruiser Rockers and lifters
Crane Titanium Valve spring kit
Crane custom Turbo/nitrous Cams that pull to 8500rpms
Stock Valve seals
Stainless steel valves
Unorthadox Cam gears
As well as the head being ported and pollished
to accept the air the 75MM mustang throttle body brings through a custom Sheet metel Intake. It work's for me. :)

I like to see a pic of that set-up.
Joe
97 GS w/ Hahn stage 2
Keep cruisin' & keep the shiny side up.
http://joeseclipse.homestead.com

>Here is what I have.
>Pt cruiser Rockers and lifters
>Crane Titanium Valve spring kit
>Crane custom Turbo/nitrous Cams that pull
>to 8500rpms
>Stock Valve seals
>Stainless steel valves
>Unorthadox Cam gears
>As well as the head being
>ported and pollished
>to accept the air the 75MM
>mustang throttle body brings through
>a custom Sheet metel Intake.
>It work's for me. :)


Now, Here's the question. How are you going to be able to use the power up to 8500 rpms? Is there a way to defeat the 7200rpm fuel cut? Can the PT Rockersand Lifters go up to 8500 rpms? Post up some pics of your car. I know a lot of guys on here want to see it. Thanks.



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

just email some pics to me and i'll host em. i would f@#kin love to rev to 8,500rpm!!

Chris Dishmon

"Fillet Mignon?!?!?! How about a big slab of tube steak for the pretty lady."

chrisdishmon@hotmail.com
http://klipzracer.homestead.com/index.html

:)
damn photo point!
Oh well I guess you will have to wait. Its cool if you guys dont beleive me, hell I wouldnt either until I seen it for my self. Rest assure, in due time guy's.

How are you gonna rev that high? Do you have an engine management system, or did you get a custom ECU made? Please help us that want to rev that high.




KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

How much are you putting out with that setup? Is thier anyway that type of readline imaginable for an auto?



bkosobud@millinfo.com

www.vectorracing.com

I am auto, with some level ten goodies of coarse.

how much (HP of course)is your motor putting out? How much can the stock trans take?



bkosobud1@millinfo.com

www.vectorracing.com