Anyone have a rear view of our engine out of the car. I need to see the passenger side near where the head meets the block area on the backside of the engine.

Look around the pics on www.murix.com



________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

well its your lucky day!!! I just took my engine out yesterday boy was it a bitch the cherry picker kept hitting my garage door and I had to figure out how to do it all on my own O_0

anyway I just went to my garage and snapped these shots I hope one of them is what your lookin for, it still got most of the crap still on the engine though

what did you hook your cherri picker to? i am getting ready to pull mine next week.

The easiest way to pull my engine out was to wrap a chain around it, ensuring that it won't snag or rip anything when stressed. Then hook the ends of the chain together with a D-Ring and attach them to the hook on the cherry picker and lift it out. Good luck!

I used the rear engine hook on the head and I didn't have a front one because I took it off when i took my manifold off long ago for the turbo install. so I just stuck it on a bolt on the bell housing and put a rag over the valve cover so the chain wouldn't sratch it. but to get it on the engine stand I hooked it up to an exhuast manifold bolt. You need to use a leveler, well I wouldn't think its very convienient,

I used my uncles ratched chain thingie but on my MR2 I had this nifty crank thing that had chains coming off of both ends that worked better.