I have a '95 Talon the motor has approx. 12,000 mi. it was rebuilt the auto trans. has approx. 4,000 mi.(rebuilt also) I have a Greddy EVO Cat-Back Exhaust hollowed cat. MSD DIS-2 (by the way I get an engine code when its on how do I fix that) MSD wires, Bosch Platinum +4 plugs Crower Stage 1 Cams (Only cause I was told I had to get dual springs and titanium retainers for stage 2) bored TB, and a Cold Air Intake and the best time I ran was 18.7 with 17" rims and 18.5 with 14" rims I have alot of weight in the back from my stereo system (200+ pounds) But I figured I could run better than that!!!!!x( any suggestions would be appretiated. Also does anyone have a working link to the EGR Block off?

I believe that this is the link you need....if not then my bad :P

http://www2.cesa12.k12.wi.us/brent/personal/neon/pic/cat_resistor.html

as for the quarter time, 200 lbs is alot of weight in the back. On top of that, its a AT. I would say that the best mod for you right now would be the final drive mod. Do a search to find more info. Besides that, i would say maybe spray, or go turbo, or do the MT swap. Hope i helped at least a lil bit. Good luck :thumbsup

u need either lots of power or a better tranny setup, iE

tranny mods,
upgraded valve body and a few other upgrade parts,
new torque converter,
final drive mod,

motor
turbo,
2.4 swap,
Nitrous

all motor bigger cams etc..


u need a UDP
an AFX ecu wouldn't be a bad idea

Bill

in 105 degree heat with damn near 100% humidity i pulled off a 18.2 fastest in my stock auto 2gnt with 16inchers :P

Any one have a link for the A/t to M/t conv. Also, my friend wants to sell me his 91 Talon Tsi for $100 the motor is perf. as I worked on it to get it running and on our first test drive we slammed it into some lady at 60mph (we had no insurance, registration and the wrong tag on the car luckily I knew the cop) and now the frame is bent....anyway back to the topic. can I use all the turbo parts off that to turbo my car with the exception of the exhaust manifold (anyone know where I can get one cheap?) It's got a TD05 on it and its in good cond. or if I do a turbo kit anyone know where I can find pics or info on installation procedures, I already tried searching on here.

Thanks

95' ESI
CAI
Greddy EVO Cat-Back
Cat Hollowed
P&P TB
Shift Kit
Crower Stage 1 Cams
Msd ign. and wires
Bosch +4's
3" drop

u can check out the turbo section and research there for that, as far as that talon...is it AWD?

No its a FWD But it was pretty quick Not much torque but at 3k when the turbo spooled it lit the tires up!! we peeled 1st,2nd,part of 3rd and skurted 4th

Uhm....if it's a 1g it has the 4g63 correct? I thought we couldn't use the transmissions from those engines in our cars