2GNT.com Forums - Printer friendly page, topic ID #4123 -

Go back to previous topic
Forum name	Performance/Engine
Topic subject	Bypass for Iceman
Topic URL	https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=4123
4123, Bypass for Iceman Posted by james, Jun-26-01 11:04 AM I need a bypass valve for my iceman. Is it 2.5 or 3 inches? Also are all the cold air intakes for NT's the same diameter? James 1999 Mitsu RS Northstar White mymitsu99@hotmail.com
4124, RE: Bypass for Iceman Posted by james, Jun-26-01 02:37 PM Wait are the AEM Bypass Valves universial? James 1999 Mitsu RS Northstar White mymitsu99@hotmail.com
4125, RE: Bypass for Iceman Posted by Talon, Jun-26-01 04:26 PM from what aem told me they "should" work fine. notice the word should! Talon 97'Talon Esi AEM cam gears Injen short ram intake Rear-upper strut bar would have more mods but just a poor kid! LOL
4126, RE: Bypass for Iceman Posted by alexries, Jun-26-01 04:52 PM It will fit any round tube, so long as it's the right size. Coo' 1997 RS AEM Cold Air Intake B&M Short Shifter Trust Shift Knob Trust EVO Exhaust Front Upper Strut Bar Rear Upper Strut Bar AutoMeter A/F Ratio Gauge 'tis it
4127, I heard there are 3 different sizes of bypass valves Posted by Fast420A, Jun-26-01 04:54 PM KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Ported Intake Manifold Ported Throttle Body Custom 2 1/4 inch exhaust Empty Catalytic Convertor 225/50/16inch Wheels and Tires
4128, RE: I heard there are 3 different sizes of bypass valves Posted by james, Jun-27-01 10:15 AM I also thought there were three different sizes. 2, 2.5, 3 inches are the choices. But NER has the "universial" AEM Bypass valve on sale. Doesn't anyone have an Iceman with a bypass valve? James 1999 Mitsu RS Northstar White mymitsu99@hotmail.com
4129, RE: Bypass for Iceman Posted by UFO, Jun-27-01 07:51 AM Hi....I've a ICEMAN cold air intake installed. After that I bought 3" diameter AEM bypass valve. I could not install it between the first section and second section of intake. The diameter is about the same as 3" Bypass valve. You have to do some modification to make it fit and I'm thinking about it.
4130, RE: Bypass for Iceman Posted by james, Jun-27-01 10:19 AM UFO, Ok, 3" then. I'm gonna go ahead and order it. I'll post when I get it on the intake. Let me know if you get it first. Thanks again. James 1999 Mitsu RS Northstar White mymitsu99@hotmail.com
4131, RE: Bypass for Iceman Posted by SOLAR, Jun-28-01 05:57 AM I don't know if it will fit on the iceman, because it has that slight cone shape that's supposed to add velocity.