| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Map Sensor Computer Code |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=40931 |
40931, Map Sensor Computer Code
Posted by mitifto, Jan-05-03 01:54 PM
Hooked up my scan tool and it told my the map sensor voltage was high. I installed the star performance turbo kit and the map sensor By-pass. Is this normal, or is the map sensor by pass bad. Thanx
|
40932, RE: Map Sensor Computer Code
Posted by juggalo, Jan-05-03 08:48 PM
i not for sure cause i don't have a turbo on my clipse but i think you need to get a 2-bar or 3-bar map sensor depending on your boost.
|
40933, RE: Map Sensor Computer Code
Posted by mcgyvr, Jan-06-03 12:40 AM
no, your bypass is not working correctly,either try hooking it up again correctly or you should get the missing link from http://www.synapseengineering.com/html/ml003.html
its much better than any black box clamping diode, its a check valve its great
|
40934, RE: Map Sensor Computer Code
Posted by mitifto, Jan-06-03 02:20 AM
Do you have this missing link on your turbo eclipse? Any other place that sells it cheaper and it says that its made for a acura honda. Will it work on a eclipse. Thanx
|
40935, RE: Map Sensor Computer Code
Posted by JasonESi_T, Jan-06-03 02:23 AM
Make sure and buy the ML003. That's the one for the non turbo eclipse. Many of us use it. The "fuel mappers" and even the "voltage clamps" from Split Sec are known to fail.
They cost around $50 from Group5 Motorsports. http://www.group5motorsport.com/cgi-bin/GRPstore.cgi?user_action=detail&catalogno=SE-MissingLink
|