Go back to previous topic
Forum namePerformance/Engine
Topic subjectCan this be made to work with our cars?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=39382
39382, Can this be made to work with our cars?
Posted by Dirty, Dec-12-02 11:26 AM
This is kinda pointless right now, but is there a way we could hook this up to our knock sensor and it work?

http://www.pfyc.com/store/merchant.mv?Screen=PROD&Store_Code=PFYC&Product_Code=WB2001&Product_Count=17&Category_Code=GPINT

.

39383, RE: Can this be made to work with our cars?
Posted by HiOnPSI, Dec-12-02 02:34 PM
we dont have a knock sensor.



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC
39384, RE: Can this be made to work with our cars?
Posted by slacker911, Dec-12-02 02:52 PM
yes we do!!!
39385, RE: Can this be made to work with our cars?
Posted by Breezio, Dec-12-02 03:31 PM
somebody on this board is already making a 'knock' gauge for the 420a.. and i'm sure it'll cost alot less.
39386, RE: Can this be made to work with our cars?
Posted by MotoFool, Dec-13-02 07:25 AM
whos making it any info on its progress id be interested in the kit ata later date(when i get my turbo on ;-) )
39387, RE: Can this be made to work with our cars?
Posted by mcgyvr, Dec-13-02 07:39 AM
http://www.gnttype.org/techarea/projects/knock/knock.zip
thats all the schematics,bom,etc...