ok how do we burn the tires ,i mean like sit thier and melt them not a high rpm lanch is their a way.mabye pull th e brake i dont no can somone explain?please like spet by step thank you

Well if you are talking about launching at the track, never do a harsh burn out on street tires, as they can heat up too much and get greasy, causing poor traction. Only do burnouts on slicks. I usually will pull up on the E-brake lever with constant pressure, then rev up pretty high, then slip the clutch out till the tires spin. Then drop the clutch fully for a good burn out, and drop the gas pedal. On my street tires at the track, i just did a mild, tire clean off tire spin, just to get a little heat in the tires, and to get them cleaned off of any crud. Dont smoke em. I spin street tires for about a second or two.

Ahh a good old fashioned Power Burn^^^^^ he pretty much sumed it all up for u, u gotta generate major engine power to smoke up the block and regular street tires wont cut it, they have to much traction. Only thing he didnt add was that you will definitely fry your clutch on this one if u abuse it too much.

BOOST!-Tis far better to have it and not need it-than to need and not have it.

96 Black GS
Fog Light Mod*Custom Built Foxx 2K2 Short Air Intake* Foxx 2k2 Short Shifter*Indy Sequential Shifter Knob*Grabber Green/Orange Brake Caliper Color Mod*(:waryAryton Sienna R*I*P Orange/Green Engine Color Scheme) Maxspeed Catback System*18" Konig Black Opal Verdicts wrapped in Toyo Proxes FZ4's*Front Strut Tower Bar*Indiglo Gauges*MT4 Indiglo Pedals*Eibach Sportline Springs*$$$ Eibach Rear Camber Kit$$$$
Coming$$$$$$ HRC Stage 2 Turbo