| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | HELP!!! MY FRIEND NEEDS A MOTOR!!!! |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=3710 |
3710, HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 99GSBBTurbo, Jun-19-01 07:53 AM
My frined has a 96' GS and he just blew his motor...He needs a new one...cause it's non repairable. Could someone PLEASE help him!!!! He wants the Jap spec Lancer motor so he doesn't have to change the motor mounts for the GS-T motor or the drive shaft. ANY HELP WOULD BE GREATLY APPRECIATED!!!!!

Ball Bearing Star Stage II "Power is nothing without control"
|
3711, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 99GSBBTurbo, Jun-19-01 07:57 AM
Here's his car...


Ball Bearing Star Stage II "Power is nothing without control"
|
3712, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by alexries, Jun-19-01 02:23 PM
LAST EDITED ON 19-Jun-01 AT 07:23 PM (PST)99GSBBTurbo- Don't tell your friend but your car looks better, sorry.
Coo' 1997 RS AEM Cold Air Intake B&M Short Shifter Trust Shift Knob Trust EVO Exhaust Front Upper Strut Bar Rear Upper Strut Bar AutoMeter A/F Ratio Gauge 'tis it
|
3713, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 99GSBBTurbo, Jun-19-01 05:56 PM
:-) Thanks ( my dad said the same thing)...do you have any ideas where he could get an engine for cheap??? Any help would be greatly appreciated!!!!!

Ball Bearing Star Stage II "Power is nothing without control"
|
3714, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by Niclipse, Jun-20-01 07:43 AM
Where did your friend get his roof scoop from? I don't like the color, wheels, or front bumper. I know the wing his the hottest trend now, but I hate that the most.
Your car is smokin, cause it's clean.
-Nick

|
3715, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 99GSBBTurbo, Jun-20-01 12:56 PM
Thanks...wow, I didn't think my car looked better, cause he has a body kit, paint job, and his attracts more attention. Thanks a lot!!!!!!! I'll ask him as soon as I get the chance.

Ball Bearing Star Stage II "Power is nothing without control"
|
3716, man.... Posted by klipzracer, Jun-20-01 01:39 PM
....i hate to know what you guys think of my car. :'(
Chris Dishmon coming soon: PAINT!!!!(any donations of paint code p88 would be highly appreciated) chrisdishmon@hotmail.com http://klipzracer.homestead.com/index.html

|
3717, RE: man.... Posted by alexries, Jun-20-01 04:29 PM
Hey Klipz your car is friggin tight too. You just need side skirts (unless you've got 'em and I haven't seen 'em), then you be pimpin', I LOVE THE HOOD DUDE!!!
Coo' 1997 RS AEM Cold Air Intake B&M Short Shifter Trust Shift Knob Trust EVO Exhaust Front Upper Strut Bar Rear Upper Strut Bar AutoMeter A/F Ratio Gauge 'tis it
|
3718, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by Avenger, Jun-20-01 04:33 PM
Back to the topic ... Isn't the Lancer engine a 4g63 variant? So how's he gonna swap that in w/o chaging motor mounts, ecu, etc, etc.? I don't think that you can do that without a ton of work.
 -Avenger 99 Eclipse RS AEM CAI w/ bypass valve, Tanabe Hyper Medallion cat-back exhaust, Unorthodox UDP, Magnecore 8.5mm Plug wires, 55mm bored TB, S-AFC, Enkie Shogun 17" wheels w/ 215/40/17 BFGoodRich Scorchers (yellow), Flashy A/F gauge
Sitting around: Intake manifold for porting
On the way: OBX Cam Gears, Digital A/F guage
|
3719, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 95TalonEs, Jun-20-01 06:20 PM
So how much work would this be? Would it just be like swapping a gs-t into a non-turbo?
|
3720, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 99GSBBTurbo, Jun-20-01 07:59 PM
Actually, the Lancer Evo engine sits in the same motor mounts as our car. Look at this site... http://lancerevolutiongsr.homestead.com/EvoVII.html You could clearly see that it sits in the same spot:-) That's why he want's the Evo and not the Cyclone. oh ya, and probably cause it also puts out 280hp stock.

Ball Bearing Star Stage II "Power is nothing without control"
|
3721, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by jZa, Jun-21-01 12:59 PM
sorry, but i like his better :) (could it be i'm biased?) for the price he will end up paying for the evo swap, he could prolly get a 420A into 500HP territory. just food for thought. another thing is it might be hard to find parts in the event that s/thing fails :( how'd he blow it ?
![]() 
|
3722, RE: HELP!!! MY FRIEND NEEDS A MOTOR!!!! Posted by 99GSBBTurbo, Jun-21-01 08:07 PM
His motor was REALLY old with many miles...and he was told that the Evo motor will only cost 1,100!!! And it bolts on to the stock trany, and motor mounts!!!! A little more then a 420A but it will have mad horeses!!! I will find out more in a couple days...I'll keep you all informed.

Ball Bearing Star Stage II "Power is nothing without control"
|
3723, The engine... Posted by Skrilla, Jun-22-01 03:22 AM
sits in the same spot BUT NOT on the same mounts
Skrilla '97 Base Talon NA "Technology: The Only Replacement for Displacement" "Peace and Turbo Grease"
|
3724, RE: The engine... Posted by 99GSBBTurbo, Jun-23-01 08:19 AM
I was told he could use the same mounts and the trany...but it doesn't sound right to me either. My friend is suppose to find out more info on it next week. I'll let you know.

Ball Bearing Star Stage II "Power is nothing without control"
|
3725, The tranny?!?! Posted by Skrilla, Jun-23-01 09:17 AM
No way. Our tranny is chryls and the Evo is mitsu
Skrilla '97 Base Talon NA "Technology: The Only Replacement for Displacement" "Peace and Turbo Grease"
|
3726, RE: The tranny?!?! Posted by 99GSBBTurbo, Jun-24-01 07:07 PM
I'll find out tomorrow...but that's what I said.

Ball Bearing Star Stage II "Power is nothing without control"
|