Go back to previous topic
Forum namePerformance/Engine
Topic subjectAPEX S-AFC INSTALL HELP
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=36759
36759, APEX S-AFC INSTALL HELP
Posted by ftk10198, Nov-10-02 05:03 AM
Does anybody have the link or some good install tips on installing the s-afc on our cars?

96RS 420A
Wiseco Forged Pistons; Top Seal Rings; Eagle Forged Connecting Rods; Milling Oil Pump; Apex S-AFC; Intake/Exhaust; AEM Cams; Unorthodox Underdrive Crank Pulley; Breathers; Magnacor Wires w/ NGK Plugs; Powder coated valve cover; Chameleon Paint Job; Sensei front bumper; Andy's side and rear bumper; Combat wing; Front Projector Lights; Altezza Tail Lights w/ custom Reverse Strobe lights; 18" Concept 5 225-40-18; Ground Control Coil-overs; Matrix Front and Rear Strut bars; Custom Carbon fiber interior; Indaglo gauges; Auto meter Air/Fuel Ratio Gauge and Oil Pressure gauge; Tenzo R 5" Tach; Push Button Start; and custom Stereo system.


36760, RE: APEX S-AFC INSTALL HELP
Posted by sonikbewm, Nov-10-02 05:19 AM
http://www.turbogs.com/tgs/info/afcinstall.html

That should help you out.
36761, RE: APEX S-AFC INSTALL HELP
Posted by 96venger, Nov-10-02 05:25 AM
www.Armond30.com

Then go to Tech. Should be everything you need as far as wiring colors.
36762, RE: APEX S-AFC INSTALL HELP
Posted by shuwa29, Nov-10-02 08:05 AM
or if you need anymore help, let me know. i did mine back in august and i can tell real quick if you need to know. 770-265-2349 is my cell number if it comes down to you needing help. let us know.
later
36763, RE: APEX S-AFC INSTALL HELP
Posted by ftk10198, Nov-10-02 10:32 AM
thanks for all the info :thumbsup i just finished installing it now. all i need to do now is set it up right. anyone know the best setting for it with the kinds of mods i have???

96RS 420A
Wiseco Forged Pistons; Top Seal Rings; Eagle Forged Connecting Rods; Milling Oil Pump; Apex S-AFC; Intake/Exhaust; AEM Cams; Unorthodox Underdrive Crank Pulley; Breathers; Magnacor Wires w/ NGK Plugs; Powder coated valve cover; Chameleon Paint Job; Sensei front bumper; Andy's side and rear bumper; Combat wing; Front Projector Lights; Altezza Tail Lights w/ custom Reverse Strobe lights; 18" Concept 5 225-40-18; Ground Control Coil-overs; Matrix Front and Rear Strut bars; Custom Carbon fiber interior; Indaglo gauges; Auto meter Air/Fuel Ratio Gauge and Oil Pressure gauge; Tenzo R 5" Tach; Push Button Start; and custom Stereo system.


36764, RE: APEX S-AFC INSTALL HELP
Posted by pn0ymahal, Nov-10-02 11:10 AM
most cars use 6in/out or 7in/out. depends .. and as far as the basic which is on the link given to you. but as far as tuning the afc, dont tune unless u got bigger injecs or and know what the heck your doing, or you will blow it up
good luck


Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast