| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Car Stalls everytime i hit Brakes with AUTOMATIC tranny, ISC? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=35533 |
35533, Car Stalls everytime i hit Brakes with AUTOMATIC tranny, ISC?
Posted by 95EclipseGSPA, Oct-23-02 01:59 AM
Everytime i come to a stop or abrupt stop my car just shuts down, the idle is low, but ok, and i get a CEL 11 and 54, which are CPS (Cam Position Sensor).
Is there a Idle Control Sensor, or just screwing out that screw on the TB only way to turn up idle? I dunno what it could be, almost like when i hit brakes, needle juss falls off, it's almost like the brakes are takin up power and the needle juss falls and car stalls.
Whats goin on?
|
35534, RE: Car Stalls everytime i hit Brakes with AUTOMATIC tranny, ISC?
Posted by mcgyvr, Oct-23-02 02:13 AM
check the wiring or replace the cam sensor thats your problem
the CEL codes are there for a reason
|
35535, Common Problem?
Posted by 95EclipseGSPA, Oct-23-02 02:48 AM
This seems to be a very common problem
http://bbs.asog.net/viewtopic.php?t=8562
http://bbs.asog.net/viewtopic.php?t=25221
http://bbs.asog.net/viewtopic.php?t=25153
http://bbs.asog.net/viewtopic.php?t=22648
http://bbs.asog.net/viewtopic.php?t=10427
http://bbs.asog.net/viewtopic.php?t=13828
http://bbs.asog.net/viewtopic.php?t=13826
http://bbs.asog.net/viewtopic.php?t=22648
Alot of these point to EGR, which is blocked off on mine, Idle Speed Control,PCV, O2, Fuel Filter, Cleaning TB.. just about everything
|
35536, Check Cam Sensor
Posted by 95EclipseGSPA, Oct-23-02 04:11 AM
If i have a volt meter is there anyway to check the Cam Pos. Sensor? like what would i look for? what pins would i use, is there 4???
what voltage ect?
i wanna check to see if i'm gettin a signal.... and if theres power there, i think i'm also leakin a lil oil from there would that cause it?
| |