| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | feel like a newbie...who's got fan mod write-up? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=34240 |
34240, feel like a newbie...who's got fan mod write-up?
Posted by babybeclipse, Oct-06-02 06:27 AM
Since I'm soldering under my hood I might as well run some wires and have both my cooling fans come on at the same time.
Who has the write-up for this mod?
|
34241, RE: feel like a newbie...who's got fan mod write-up?
Posted by iamnotwhoiam, Oct-06-02 08:48 AM
no real writeup.. just grabbed the chiltons and found the correct wiring to the fans and tapped into the power and ground on the one that starts up all the time and ran wires to the power and ground into the other one after un plugging it. wires can be run at the top of the fans/radiator for ease.. just be sure to tape and secure.
|
34242, RE: feel like a newbie...who's got fan mod write-up?
Posted by 95ALLmotorFWD, Oct-06-02 10:10 AM
hey i really wanan do this mod, can anyone give me step by step instructions on what to do, does this mod help any???
|
34243, RE: feel like a newbie...who's got fan mod write-up?
Posted by iamnotwhoiam, Oct-06-02 11:05 AM
the only reason i did it was because the other fan was not coming on when i turned on the ac and since it gets hella hot here in houston i had to do something about it.
|
34244, RE: feel like a newbie...who's got fan mod write-up?
Posted by babybeclipse, Oct-06-02 11:57 PM
>no real writeup.. just grabbed the chiltons and found the
>correct wiring to the fans and tapped into the power and
>ground on the one that starts up all the time and ran wires
>to the power and ground into the other one after un plugging
>it. wires can be run at the top of the fans/radiator for
>ease.. just be sure to tape and secure.
Kool thats all I needed to know. Time to bust out the Chilton's :P
|
34245, RE: feel like a newbie...who's got fan mod write-up?
Posted by Michael_97RS, Oct-06-02 11:13 AM
This is going to be a winter project, I'm going to wire up a bypass switch for both fans, I'll try to remember to write it up, maybe pictures, if you're lucky :P
Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
All motor in the making.
Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
| |