| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | How to use Gasket Paper | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=34162 |
34162, How to use Gasket Paper
Posted by Semperboost, Oct-05-02 02:02 PM
Okay I got some gasket paper at NAPA...looks like thick cardboard...for my throttle body. How do I get an accurate cut for the circle and ports?? thanks
Alvin
96 RST
http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs
|
34163, RE: How to use Gasket Paper
Posted by DarkOne, Oct-05-02 02:09 PM
For the round ports, use a ball bearing and a hammer while the paper is over the hole. The ball bearing will pinch the paper around the hole and cut it.
Use an xacto knife or razor blade for the rest. it doesn't have to be perfect.
I actually just use Ultra Black on mine.
| |