As stated above, im picking up a motor this weekend. I found a full 2.4 motor for only $125. Lucky me!!! Anyways, I lost the link to a writeup someone did on the swap. Im going to rebuild it with either 10.6 or 11.6 comp pistons and do the howll top-end kit. Im not sure which cam grind to get and what oil pan I can use. If some has any ideas, please help me out. TIA.

Man I wish I could run across a deal like that. Good luck with the swap. Hopefully, i'll be able to undertake similar actions this winter. BTW, I'll be rooting for UCONN to upset Miami this weekend. I doubt it will happen, But I'll be hoping for anything bad to happen to the teams ranked above my beloved DUCKS!!!

2.4 oil pan.

Crane 18's or 22's ;) Anything less would be a waste of time ;)

>2.4 oil pan.
>
>Crane 18's or 22's ;) Anything less would be a waste of time
>;)


I thought that the 2.4 wont fit since our crossmember is in the way. And i was thinking the 18's, but was wondering what the streetability would be like with them. And yeah, Uconn better kick some ass this weekend.

>I thought that the 2.4 wont fit since our crossmember is in
>the way. And i was thinking the 18's, but was wondering what
>the streetability would be like with them. And yeah, Uconn
>better kick some ass this weekend.

You will have to make it fit by cutting a part of it and welding it back with some filling
Try to get the steel oil pan, some years had a casted aluminium oil pan

Alain

go to www.neons.org for info on the buildup on the 2.4 part s etc, there are 2 other swapping this motor right now me and the1bill my aim is mischiefmaker33 me and the other bill can help u i got my motor for 157.50 for the core shortblock

=) good deal on yours too

Bill