ok i was driving home the other night... this has happend before.. my clutch master cylinder is a small bit leaky and leaks like at the freakest of times, sometimes it will go a month w/o leaking out.. anyways i always check my fliud, it all decided to leak all the way out the other night and as i drove home it got worse and worse until it was almost impossible to shift, i was almost home to so kept driving. by the time i reached my drivway there was NO WAY it would go in gear, this has happend before and i just bleed the air out of the slave bolt and refil it all and my clutct pedal gets stiffer and always lets me shift... this time i did it... and it still won't go in gear... = < what's wrong ???? [br />

It's leaking. :rolleyes

Ok, enough with the smart ass remarks. Seriously though, a trickle can turn into a waterfall on a hydraulic system real quick. It's not like oil(that can blow by the rings), the brake and clutch hydraulics are lossless systems. They do NOT leak or loose fluid for any good reason whatsoever. :nono

You may be able to get a brake master cylinder rebuild kit to replace all of the seals(anyone?). If not then you'll have to replace the master cylinder. After stopping all of the leaks, just bleed the system and you should be golden.


ride__________95 Eclipse RS : 5 speed
power________Gude cams : AFX UDP : ram air : test pipe : Thrush glasspack
suspention___BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Rampage sub
shizzle_______AutoCommand remote start : dual air horns
incomming___GreenSlime F/R lower strut ties : Jeep TB

i know the master cylinder is leaking, i just kept refilling it till i could get around to replacing it.. u mean the clutch master right now the brake ? lol

Replace or rebiult the clucth master cylinder. rebiuld kit only cost $15 at autozone. My car did the same thing early this year. I kept refilling it till one day it don't want to go in gear anymore...

i called my autozone and they said they didn't have a rebuild kit... do they ? so u guys think that's the problem ? is the rebuild safe or should i just replace the whole thing?