| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Running on blown head gasket question... | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=32331 |
32331, Running on blown head gasket question... Posted by REV_GSlow, Sep-09-02 01:06 PM
Will running on a semi blown head gasket cause any problems in the long run? If so..what. TIA!
|
32332, RE: Running on blown head gasket question... Posted by bullox, Sep-09-02 01:35 PM
>Will running on a semi blown head gasket cause any problems >in the long run? If so..what. TIA!
maybe a fully blown head gasket :) that's my smartass answer for the day
|
32333, RE: Running on blown head gasket question... Posted by REV_GSlow, Sep-09-02 03:16 PM
I appreciate the smart ass answer..lol. But i do need a real answer. Im talking about long term piston damage, valves..anything like this? TIA
|
32334, RE: Running on blown head gasket question... Posted by Super20G, Sep-09-02 04:43 PM
As long as you keep adequate oil in it, as well as other maintaince, you should be ok.. My fiance has an old 93 grand am, and it has had a leaky head gasket for 5 years or more, its not bad, maby a quart of oil every 3-4 weeks... and it has been fine, just never let it go low or you will starve a bearing...
|
32335, RE: Running on blown head gasket question... Posted by The1Bill, Sep-09-02 05:10 PM
Well, just be careful if the oil and coolant start mixing. Then you might run into some problems, as water and coolant are not as good of a lubricant as oil. -=B-=
|
32336, RE: Running on blown head gasket question... Posted by REV_GSlow, Sep-10-02 02:21 AM
Thanks alot
|
32337, RE: Running on blown head gasket question... Posted by JT, Sep-10-02 05:54 AM
You could warp the cylinder head or block deck, then it will need to be milled "true" before repair. This is fairly common.
Oil and/or coolant could enter the combustion chamber and cause smoke from the exhaust, or worse, wash down the cylinder walls and damage the bore/rings.
Head gasket kits are cheap, and semi easy to do with the right tools, so I wouldn't run on it too long. But check your fluids weekly, and don't beat on it, and you should be ok
| |