LAST EDITED ON 12-Jun-01 AT 12:26 PM (PST)

i thought that our cars already had two radiators. one for engine and one for tranny. is that so or is one engine and one is a/c ? i found an auto tranny cooler that i would like to get and install but i have no clue how to even go about this. i am a person that likes to do precautionary things before going big. like engine work before turbo...tranny cooler before turbo or anything like that. here is a link to the coolers they are by B&M which one should i get ????



http://www.carparts.com/parts/newsearch2.asp?reflink=0-0-0-0-0&sourceid=2&parttypeid=3019&itemid=5333&autoidsearch=NO


or this one


http://www.carparts.com/parts/newsearch2.asp?reflink=0-0-0-0-0&sourceid=2&parttypeid=3019&itemid=5305&autoidsearch=NO




Talon
97'Talon Esi
Injen short ram
stock 16" rims <---heck yeah !!!
AEM cam gears

I've got a Perma-cool tranny cooler from the local auto parts store. It was $40 and took a couple hours to install. Its behind the drivers side brake duct. Here is a picture that describes the flow path (also for AT temp gage).


Corbin
'95 ESI-T
HRC + FMIC
http://members.nbci.com/cbehnken/

so it goes FMIC then tranny cooler then radiator?

Talon
97'Talon Esi
Injen short ram
stock 16" rims <---heck yeah !!!
AEM cam gears

I don't get what you're asking???


Corbin
'95 ESI-T
HRC + FMIC
http://members.nbci.com/cbehnken/

nothing i got it i was having a dumbass attack there so its cool man. how hard was the auto cooler to hook up and i want to hook up an oil cooler also...has anyone done this. adn it this where i would monitor the oil temp from teh line of oil going into the cooler?


Talon
97'Talon Esi
AEM cam gears
Injen short ram intake
Rear-upper strut bar

would have more mods but just a poor kid! LOL

The AT cooler isn't hard to hook up. I made a bracket for it out of 1x1/8" aluminum bar. There is plenty of room in the drivers side. I also have an oil cooler in the passenger side brake duct. There is not much room there, so it took a while to mount. That cooler was about $80...no temp gage for it though. Bought it a "Pep Boys", maybe its a Perma-Cooler too...don't remember. That one uses a sandwich adapter that fits between the engine and oil filter. I had to get a shorter filter, so it wouldn't hang down (and snag on things).


Corbin
'95 ESI-T
HRC + FMIC
http://members.nbci.com/cbehnken/