;-)

See more of Houston 2GNT's weekend at: http://www.heavenz-not-0verflowing.com/pics/head_work/

Mucho, MUCHO thanks to everyone involved. You guys kick so much ass it's not even funny. Thanx for all the help, Thura!

dude nice head if i may ask how much was it,

i'm looking for a head my self

Jay

looking good dino

Let's start by saying it's not cheap at all. There is no such thing as budget head work.

If you're interested in spending a lot of money, it was all done in-house at ARD in Houston. You can call them for a quote.

BTW - you're looking at Fererra 1mm oversized valves and a COMP valve job ;-)

Looks great Dino, tell us how you like it. Have you got a chance to swap heads yet?

also more pics can be found here http://66.25.58.203/photoalbum/cars/jason/new/dino-head-swap/

dino do they have a number of website, money is not that much of a problem i want to do it, do they sell the heads of dp they just re do them, becuase i'm building a complete race engine,. let me know thanks dino

Jay

Beautiful, it's good to see my spare head being put to such good use.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

dino, what mods did you put into this head? i know its not cheap but around how much are we looking at for something like yours?
cool...




Michael 99gs
HRC Stage 2
http://www.dreamwater.net/purplebeast

Yeah, the head is on. Dino and I put it on Sat and Sunday. All I have to say is it wasn't nearly as hard as I thought but it was VERY time consuming. Took us a full 2 days. We did have to wait for some time because the exhaust manifold was ported, intake manifold, and fashioned an egr block off plate.

Glad to know that all the blood, bruises, and sore muscles are working good. BTW, how's that little bit of Thura-magic holding up on the belts? Next weekend its TO THE DYNO!! Then is TO THE TRACK!!

Dino, you're very welcome! It was fun pulling off the head. We'll have another fun weekend when my internals get here. :)

WOW! a Dasini bottle!!! :P jk, looks great man.

hehe.. i was there too.. it was an interesting project non the lest.. i wish i could have helped out more.

Yeah we didn't want to get you all dirty on Sunday. :) Mess up your clothes and stuff :P

Looks Good Dino!

Can't wait to hear the results. More than dyno results, I just want to hear how it feels by the seat of your pants.

I don't think the orgasm stopped until i smoked yet another wastegate flange gasket.

Its still fast as balls.

I once tried to sell this beast turned beauty here for cheap but now it will just collect dust until I get the car back into full use. Michael_RS has the cams (amongst other of my intake parts) and Wyatt has the valves.

Infamous coffee table! Man Dino, you're giving me a car-gasm over here! I'm curious what she put down on the dyno. Good luck!

Its about time!!!! So does this mean that Owen is going to start on mine now?

Yeah Dino, how much?

Hey Guys,

If you all want a price please call ARD or email them. Their contact info is on their website. www.advancedracingdynamics.com

Here it all is
(713) 984-9140
fastparts@advancedracingdynamics.com

I can personally vouche for their craftsmanship, technical knowledge, experience, and work ethic. It's top notch. Call them and ask them. There are too many options on getting headwork done to be giving out prices irresponsiblely. Call and get a quote. I'm sure it will be very competitive at the least. It will probably be better.

>If you all want a price please call ARD or email them. Their contact info is on their website.

Do you guys have 5 stars by your names, does your name start with a D and end in an O, can you handle full price?!!!

>Do you guys have 5 stars by your names,

its just a message board lol who cares

does your name start
>with a D and end in an O,

no

can you handle full price?!!!

pretty sure I could.

Actually, Stan Crower has the cams I bought from you, they were used as the samples. That's the reason we have Crower Billet Cams :D

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

I had head work done as well. I have an extra head if anyone is interested. email me jay_curcillo@yahoo.com