I am doing an all out tune up this weekend, and was wondering if anyone has used the Mopar CCC? I found quite a few write ups online, but would like some first hand experience. Thanks

Anyone?

I used it once on my 91 Talon. A more knowledgible buddy recommended it and helped with the process. Pretty much what we did was spray it in a nipple on the intake tube. Kept the car idling at about 2k the whole time we emptied the can. Once the can was finished I replaced the old plugs, finished the rest of the tune-up and was on my way.

What's suppose to happen is that all the carbon build up on the tb, pistons, valves and so on will be cleaned. There will be alot of black smoke coming out through the exhaust, it's normal.

I'm no expert but I hope this helps.




>I am doing an all out tune up this weekend, and was
>wondering if anyone has used the Mopar CCC? I found quite a
>few write ups online, but would like some first hand
>experience. Thanks

I used it about 2 yrs ago and things were smoking. My manifold where the turbo connecets started leaking our some liquid..It idled crzy and white smoke came out the exhaust - in the end no damage, no improvement. I tried it thru the PCV vavle.

ALvin

96 RST

http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs

One of the guys in my car club is a Tech at Chrysler and he used it on a few of our cars, but when using it he left the car running and sprayed it into the throttle body. He would rev the engine (by using the tb) if he felt that it was dying. Then he would spray a little bit in there and let it sit for a while and crank it back up. After he was done I was amazed. I could look in the TB and see the opposite end of the intake manifold, where before it was just blackness.

Thanks guys.