After squeezing yesterday, my car started idling rough, like I have a mean Cam in or something. What could be wrong? It doesn't die or anything, I have no power loss, but just when I am sitting still the car feels like a Modded V8. Should I just reset my ECU and see waht happens? TIA

First off, do a compression test to rule out a blown motor or head gasket. Check you plugs to be sure they aren't fouled and whatnot..I would check those things first...then get back to us..

Heh, I agree with Matt :) Check your plugs man. Probably fouled one and its causing your rough idle.

Ok guys, I changed my plugs and wires yesterday. Nothing has changed, still a rough idle when at a stop light or something. Would I have any power loss with a blown headgasket? Cause I still have all the power. Could it be my timing belt by any chance? TIA

make sure all ur vac lines are still secure. the other day i took off the pcv line and the car idled extremely rough, the engine was "jumping" all over the place.

Which one is the PCV valve?

It actually sounds like you burnt one of your intake valves. I have seen the same thing on a buddy's car after he sprayed. Just my two cents. I would definitely do a compression test.

yeah I'm gonna do a comp. test tonight. I hope it comes out ok.

the pcv valve goes from the vc(left side of the coil) to the intake mani. the valve part it that little "L" fitting.