| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | running lean at WOT???? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=31003 |
31003, running lean at WOT????
Posted by dot9matrix, Aug-25-02 01:03 PM
I've had this problem since I bought the car. When I push the gas pedal all the way down(WOT) the car doesn't accelerate, when I let off of it it accelerates fine again. I hooked up a datalogger today. When I push the pedal to the floor the O2 sensor goes to .04 which means no fuel I think, right? When I let off a little it goes to .92. I have no CEL. I have replaced: fuel filter, plugs, wires, ECU, TPS, MAP, IAT, Camshaft, Coolant temp sensor. When I trick the Coolant Temp Sensor into thinking the coolant is cooler, the car runs fine but the O2 sensor still goes to .04 at WOT. Any ideas would be appreciated, I'm not sure of what other readings to look at to help solve my problem so if you could help me with that also. Thanks.
|
31004, RE: running lean at WOT????
Posted by Breezio, Aug-25-02 01:15 PM
i thought when ODBII cars go WOT the computer doesn't listen to the O2 sensor anymore for fuel mixture and just goes with the richest curve.. but again.. that's just something I heard, I don't know if it's true.
|
31005, RE: running lean at WOT????
Posted by Michael_97RS, Aug-26-02 01:54 AM
I would look into a fault ECU at this point.
Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
All motor in the making.
Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
| |