| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | can't find this info, sorry guys | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=30539 |
30539, can't find this info, sorry guys
Posted by bustrblue2, Aug-19-02 06:47 PM
i've looked everywhere for this info before i posted this guys. now, does howell make a 2.4l kit? i've seen their site, they only have the 2.2l. how would i go about it if they don't or won't custom make one? also, i saw somewhere about a 3.0L aluminum block...this possible? thanks. and no, i don't have a car...yet. but when i get my settlement, it's gonna be a beast!}>
|
30540, RE: can't find this info, sorry guys
Posted by Michael_97RS, Aug-20-02 01:13 AM
The 2.2L is a troker kit for our motor, the cut and reweld the crank, overbore cylinders .020" to increase displacement to 2.2L. You can't get to 2.4L on our block.
The 2.4L is the Chrysler motor put into minivans, PT cruiser, and a few others. WIth some modification it should fit and workin our car with ur head.
The 3.0L aluminum race block should be in the works.
Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
All motor in the making.
Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
|
30541, RE: can't find this info, sorry guys
Posted by bustrblue2, Aug-20-02 07:08 AM
thanks for the info. who's makin the 3.0l block? and would anyone be able to walk me through with the 2.4l block if the 3.0l hasn't came out yet?
|
30542, RE: can't find this info, sorry guys
Posted by Twiste, Aug-20-02 07:28 AM
the 3.0 block is being built and developed by Howell Automotive, the same company that does the Stroker kit.
|
30543, RE: can't find this info, sorry guys
Posted by ez, Aug-20-02 08:34 AM
AFX manufacturing for the aluminum 3L racing block with cross bolted bottom... that was a pretty recent post so it should still be in the general2gnt section
|
30544, RE: can't find this info, sorry guys
Posted by DSMeclipseGS, Aug-20-02 10:09 AM
i just stopped by the message board on howell's ite and only 1 guy is interested in the 3.0L aluminum block so far. they need at least 10 people i believe. Or else it will cost $18K to manufactue such a block for 1 person. so many buyers are a must. go check it out.
|
30545, RE: can't find this info, sorry guys
Posted by Joshua97478, Aug-20-02 10:31 AM
I'm interested. Very. But apparently my wallet is not as interested as i am. **Prays to the rain gods for money to fall from the heavens**
|
30546, RE: can't find this info, sorry guys
Posted by bustrblue2, Aug-20-02 01:53 PM
lol joshua!
thanks for the info guys. i'll head on over there to let'em know i'm interested in it. maybe we can get that and a new ECU!
|
30547, RE: can't find this info, sorry guys
Posted by bustrblue2, Aug-20-02 02:25 PM
ooooooh man! i've been looking at everything i can find related to it and do you guys think gary will build one around xmas time even if he doesn't have enough people? cause that should be, hopefully (*praying*) that'll be around the time of my settlement. then we could REALLY compete with some supras!!! also, i'm going to look but could anyone give me the link to the original post by darkone in the general section? thanks
| |